Skip to content
Bell

12-in-1 Flip Weatherproof Cover, 1-Gang, Gray, Horizontal/Vertical

0 Reviews
SKU
MX1250S

The Bell MX1250S is a single-gang flip weatherproof cover for outdoor receptacles or switches, made of gray die-cast aluminum. It supports 12 custom device configurations and is preconfigured for GFCI; it mounts horizontally or vertically and has a spring-hinged lid with a lockable tab.

  • 12-in-1 Device Configurations
  • NEMA 3R Rating and UL Listing
  • GFCI Preconfiguration
  • Horizontal or Vertical Mounting
  • Gray Die-Cast Aluminum
  • Gasket and Mounting Hardware Included

The Bell MX1250S is a single-gang flip weatherproof cover for outdoor receptacles or switches, made of gray die-cast aluminum. It supports 12 custom device configurations and is preconfigured for GFCI; it mounts horizontally or vertically and has a spring-hinged lid with a lockable tab.

Product Overview

The Bell MX1250S is a single-gang flip weatherproof cover for outdoor receptacles or switches, made of gray die-cast aluminum. It supports 12 custom device configurations and is preconfigured for GFCI; it mounts horizontally or vertically and has a spring-hinged lid with a lockable tab.

  • 12-in-1 Device Configurations
  • NEMA 3R Rating and UL Listing
  • GFCI Preconfiguration
  • Horizontal or Vertical Mounting
  • Gray Die-Cast Aluminum
  • Gasket and Mounting Hardware Included

Technical Specifications

Product information and specifications for the selected item.

SKU: MX1250S

Product Information

BrandBell
MPNMX1250S
SKUMX1250S
UPC / GTIN092326110686
CategoryWeatherproof Covers

Key Specs

Number of Gangs1
Metallic/Non-MetallicMetallic
MaterialAluminum
Width (in.)4.82

Cover Configuration

Number of Gangs1
Metallic/Non-MetallicMetallic
MaterialAluminum
NEC compliance2014 NEC compliant (Article 406.9(A))
Mounting systemPatented Quick-Fit keyhole mounting system
Device configurations12-in-1 custom device configurations
ListingUL Listed
Cover typeFlip/Snap
Mounting procedurePlace gasket over box screws, fit the base over the screws using the keyholes, then tighten without overtightening
Configuration count12-in-1 device configurations
Included installation componentsAttached gasket and mounting hardware included
UL listingUL Listed; File E212332
Device compatibilityGFCI, duplex, switch, and round-device openings in 1-1/4, 1-3/8, 1-9/16, and 1-5/8 in. sizes
FinishPowder coat finish
Device projection requirementDevice must protrude through the base or duplex/round adapter; use UL-approved spacers to move it forward in the box if needed
Safety standardUL 514D, CSA C22.2 No. 42.1-13
Mounting-surface sealingInstall on a smooth, flat surface; on irregular surfaces, use a 1/4-in bead of non-hardening silicone caulk between the gasket and mounting surface.
Adapter systemU-Fast universal adapter system; pre-configured for GFCI
ApplicationFor weatherproof protection of an outdoor receptacle or switch
Mounting orientationVertical or horizontal installation
Locking featureLockable tab
Closure and lockingLockable tab; spring hinge closure
NEMA ratingNEMA 3R
Box and receptacle positioningBox flush or slightly behind the finished surface; receptacle flush with the finished surface
Alternate-device fittingPatented knockout technology for alternate-device fitting
Closure mechanismSpring hinge closure
ColorGray

Dimensions & Weight

Height (in.)3.02
Width (in.)4.82
Length (in.)1.18
Weight (lb.)0.325

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.