Skip to content
Inventronics

240W Programmable LED Driver EUD-240S670DTA

0 Reviews
SKU
EUD-240S670DTA

The Inventronics EUD-240S670DTA is a 240 W programmable constant-current LED driver with adjustable output-current settings from 445 to 6,700 mA and a 4,450–6,700 mA constant-power range. It supports 0–10 V, PWM, and timer dimming and is identified as IP67 for damp locations, with cULus and RoHS designations.

  • 240 W constant-current output
  • 445–6,700 mA current setting
  • 0–10 V, PWM, and timer dimming
  • IP67 rating
  • Damp-location rating
  • 9.45 × 2.66 × 1.57 in dimensions

The Inventronics EUD-240S670DTA is a 240 W programmable constant-current LED driver with adjustable output-current settings from 445 to 6,700 mA and a 4,450–6,700 mA constant-power range. It supports 0–10 V, PWM, and timer dimming and is identified as IP67 for damp locations, with cULus and RoHS designations.

Product Overview

The Inventronics EUD-240S670DTA is a 240 W programmable constant-current LED driver with adjustable output-current settings from 445 to 6,700 mA and a 4,450–6,700 mA constant-power range. It supports 0–10 V, PWM, and timer dimming and is identified as IP67 for damp locations, with cULus and RoHS designations.

  • 240 W constant-current output
  • 445–6,700 mA current setting
  • 0–10 V, PWM, and timer dimming
  • IP67 rating
  • Damp-location rating
  • 9.45 × 2.66 × 1.57 in dimensions

Technical Specifications

Product information and specifications for the selected item.

SKU: EUD-240S670DTA

Product Information

BrandInventronics
MPNEUD-240S670DTA
SKUEUD-240S670DTA
CategoryLED Drivers & Ballasts

Electrical

Wattage Range240 W
Over-temperature protection responseReduces output current and returns to normal after the over-temperature condition is removed.
Short-circuit protection responseAuto-recovers without damage; output returns to normal when the short-circuit fault is removed.
Typical power factor0.99 at 120 Vac; 0.96 at 220 Vac (typical)
External thermal protection NTC thresholdsExternal NTC thresholds: R1 7.81; R2 4.16 kΩ
Output current tolerance±5% of Ioset at 100% load
Auxiliary output current capacity200 mA source current; 400 mA transient peak for up to 300 ms in a 2 s period, with average not exceeding 200 mA.
Output current setting ranges445–6700 adjustable; 4450–6700 at constant power mA
Total output current ripple5% of Iomax typical; 10% maximum peak-to-peak at 100% load (20 MHz bandwidth)
Total harmonic distortionMaximum 10% at 220–240 Vac, 50–60 Hz and 75–100% load
Input surge protection6 kV differential mode; 10 kV common mode
Line and load regulationLine regulation ±0.5% at 100% load; load regulation ±1.5%
Low-frequency output current rippleTypical 2% of Iomax peak-to-peak below 200 Hz at 100% load; this is the ripple component associated with visible flicker.
Standby powerMaximum 0.5 W with dimming off (measured at 230 Vac / 50 Hz)
Overvoltage protection responseLimits output voltage at no load and if the normal voltage limit fails.
Efficiency at 220 Vac inputAt 4450 mA: 91.0% minimum / 93.0% typical; at 6700 mA: 89.0% minimum / 91.0% typical.
Input frequency and AC currentInput frequency 47–63 Hz; maximum AC current 3.00 A at 100 Vac and 1.30 A at 220 Vac, measured at 100% load.

Light Output

Output lumen compensationCan maintain light output by starting at reduced LED drive current and gradually increasing current over time to counteract lumen degradation.

Compatibility & Operation

Product typeLED Drivers
Dimming output rangeFor Ioset 4450–6700 mA, dims from 10% of Ioset to Ioset; for Ioset 445–<4450 mA, range is 445 mA to Ioset.
Time-dimming modesSelf Adapting-Midnight, Self Adapting-Percentage, and Traditional Timer
Recommended dimming input range0–10 V
Dimming control methodsSupports 0–10 V, PWM, and timer dimming; 0–10 V is the default dimming mode.
PWM dimming signal limits200 Hz–3 kHz frequency; 1–99% duty cycle
Operating and storage temperature limitsSafety case temperature: −40 to +87 °C; storage: −40 to +85 °C, humidity 5–100% RH.

Certifications & Warranty

Ratings & CertificatesCULUS, Damp Location, ROHS
MTBF and lifetimeMTBF 228,000 h at 220 Vac input, 80% load and 25°C ambient; lifetime 96,000 h at 220 Vac input, 80% load and 70°C case temperature. hours

Dimensions & Weight

Height (in.)1.57
Width (in.)2.66
Length (in.)9.45
Weight (lb.)2.87

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.