Skip to content
3M

3M FB-Foam Fireblock & Draftstop Foam, Orange, 12fl oz Aerosol Can

0 Reviews
SKU
FB-FOAM

3M FB-Foam is an orange, ready-to-use one-part expanding polyurethane fireblock and draftstop foam supplied in a 12 fl oz aerosol can. It seals interior voids around wires, pipes, cables and other penetrations, as well as non-rated framing gaps in residential Type V and other non-rated construction. It expands up to 200% and is not for commercial firestop use.

  • Fireblock and Draftstop Use
  • Penetration and Gap Sealing
  • Ready-to-Use Polyurethane Foam
  • Up to 200% Expansion
  • Tack-Free in About 5 Minutes
  • 12 fl oz Orange Aerosol Can

Product Overview

3M FB-Foam is an orange, ready-to-use one-part expanding polyurethane fireblock and draftstop foam supplied in a 12 fl oz aerosol can. It seals interior voids around wires, pipes, cables and other penetrations, as well as non-rated framing gaps in residential Type V and other non-rated construction. It expands up to 200% and is not for commercial firestop use.

Technical Specifications

Product information and specifications for the selected item.

SKU: FB-FOAM

Product Information

Brand3M
MPNFB-FOAM
SKUFB-FOAM
CategoryTape, Sealants & Consumables

Tape & Appearance

Color FamilyOrange
Substrate exceptionsExcepted surfaces include polyethylene, PTFE, silicone, oils and greases, mold-release agents, and similar materials
Penetration and framing applicationsSeals interior voids around wires, pipes, cables and other penetrations in non-rated wood- or steel-framed construction; also non-rated framing gaps/voids
Modified ASTM E 814 fireblock testPassed material criteria under modified ASTM E 814; the modified test does not require a hose-stream test
ICC-ES reportESR-3165
ASTM E 84 classificationClass 1 (modified)
UL surface-burning test standardANSI/UL 723, Test for Surface Burning Characteristics of Building Materials
Bonding substratesBonds to concrete, brick, metals, wood, plastic and cable jacketing
Cured foam temperature resistance-200°F to +240°F (-129°C to +115°C)
Large-cavity substrate preparationFor cavities greater than 3 in. (76.2 mm) diameter, slightly mist the substrate before application to initiate cure
Foam formulationOne-part, ready-to-use, expanding polyurethane foam
Fireblocking code requirementsMeets current IBC and IRC fireblocking sealant requirements, including state and local codes based on those codes
Flammability during dispensingExtremely flammable during dispensing
Water and exterior limitationInterior use only; do not use where water contact is expected or in exterior applications
Sunlight protectionCover cured foam exposed to sunlight with paint or stain
Surface-burning resultsFlame spread 25; smoke development 50 when applied to inorganic reinforced cement board
Intended construction and useFor residential Type V and commercial non-rated construction as a fireblock/draftstop; not for use as a commercial firestop
Expansion during cureUp to 200 %
Typical insulation valueR-value 4 to 5 per inch
Cavity-fill recommendationFill cavity only 1/3 full to allow for expansion
VOC content16% by weight (165 g/L)
Air barrier leakageAt 6.24 psf (300 Pa): <0.01; at 1.57 psf (75 Pa): <0.0025 cfm/ft²
Cure and handling timesTack-free about 5 min; dry-to-touch 30–60 min; cuttable about 1 h; full cure within 24 h, depending on ambient conditions and volume
Recommended application temperature65–80 °F (18–27°C)

Dimensions & Weight

Weight (lb.)1.07
Core density1.0 (17.6) lb/ftÂł (kg/mÂł)

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.