Skip to content
3M

3M Scotch® 35 Blue Vinyl Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10836

3M Scotch 35 Blue is 7 mil PVC/vinyl electrical tape with a rubber-based pressure-sensitive adhesive. This 3/4-inch-wide, 66-foot roll is specified for wire and cable splice insulation up to 600 V, phase identification, and wire color coding.

  • 600 V Splice Insulation
  • 3/4 in x 66 ft Roll
  • 7 mil PVC/Vinyl Backing
  • Rubber-Based Pressure-Sensitive Adhesive
  • Blue for Phase Identification
  • UL and CSA Listings

Product Overview

3M Scotch 35 Blue is 7 mil PVC/vinyl electrical tape with a rubber-based pressure-sensitive adhesive. This 3/4-inch-wide, 66-foot roll is specified for wire and cable splice insulation up to 600 V, phase identification, and wire color coding.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10836

Product Information

Brand3M
MPN10836
SKU10836
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyBlue
Length (in.)2.85
Width (in.)2.85

Tape & Appearance

Tape Length (ft.)66
Color FamilyBlue
CSA listingCSA-C22.2 No.197 “PVC Insulating Tape”; File 048769; Class 9052-02
Flame-retardant rating (UL 510)Pass
Adhesion to steel at 73°F (23°C), minimum16 oz/in (1.8 N/cm)
Winding directionWrap uphill from a smaller-diameter surface to a larger-diameter surface
IEC 60454-3-1 Type 6 temperature range-10 to 90 °C
CSA C22.2 No. 197 temperature range-10 to 105 °C
UL 510 temperature range-10 to 80 °C
Layering techniqueApply in half-lapped layers with sufficient tension to produce a uniform wind
Dielectric strength at high humidity90% of standard
Cable jacket repair / mechanical protectionCable jacket repair; mechanical protection when overwrapping rubber splicing and mastic tapes on LV/MV/HV joints and splices
Shelf life and storage conditions5 years from manufacture when stored at 50–80°F (10–27°C) and below 75% relative humidity
Recommended useReinsulating and color-coding electrical wiring
Pigtail splice techniqueFor pigtail splices, wrap beyond wire ends and fold back to leave a protective cushion against cut-through
Elongation at 73°F (23°C), minimum125 %
Adhesion to backing at 73°F (23°C), minimum16 oz/in (1.8 N/cm)
Primary insulation applicationJoints and splices in wires and cables
Insulation resistance, high humidity (minimum)1 × 10¹² Ω
Dielectric strength, standard condition (minimum)1000 V/mil (39.4 kV/mm)
Backing materialElastic vinyl (PVC) film
VDE mark / IEC designationVDE license 130462; Type 6; IEC 60454-3-1-6/F-PVCP/90
UL listingUL Listed; UL 510 “Insulating Tape”; Category OANZ; File E129200
Adhesive compositionNon-corrosive, rubber-based pressure-sensitive adhesive
Tensile strength, minimum2087 psi / 14.6 lb/in (25.6 N/cm)
Maximum voltage rating600 / 1000 V

Dimensions & Weight

Height (in.)0.85
Width (in.)2.85
Length (in.)2.85
Weight (lb.)0.195

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Regulatory Data Sheet Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Article Information Sheet Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023, Rev L) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.