Skip to content
3M

3M Scotch 35 Brown Vinyl Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10885

3M Scotch 35 brown vinyl electrical tape is a 3/4-inch-wide, 66-foot roll with 7-mil PVC backing and a non-corrosive, rubber-based pressure-sensitive adhesive. It is specified for wire and phase identification and primary insulation on wire and cable joints and splices up to 600 V.

  • 3/4 in. × 66 ft. Roll
  • Brown Tape Color
  • 7 mil Thickness
  • Vinyl (PVC) Backing
  • Rubber-Based Pressure-Sensitive Adhesive
  • Primary Insulation up to 600 V

Product Overview

3M Scotch 35 brown vinyl electrical tape is a 3/4-inch-wide, 66-foot roll with 7-mil PVC backing and a non-corrosive, rubber-based pressure-sensitive adhesive. It is specified for wire and phase identification and primary insulation on wire and cable joints and splices up to 600 V.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10885

Product Information

Brand3M
MPN10885
SKU10885
UPC / GTIN00054007108856
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyBrown

Tape & Appearance

Tape Length (ft.)66
Color FamilyBrown
Elongation125 minimum at 73°F (23°C) %
AdhesiveNon-corrosive, rubber-based pressure-sensitive adhesive
Shelf life and storage5 years from manufacture when stored at 50–80°F (10–27°C) and below 75% relative humidity.
CSA listingCSA Listed to CSA-C22.2 No.197, “PVC Insulating Tape”
Adhesion to steel16 (1.8 N/cm) minimum at 73°F (23°C) oz/in
Adhesion to backing16 (1.8 N/cm) minimum at 73°F (23°C) oz/in
Insulation resistance1×10¹² minimum under high humidity ohms
Maximum voltage rating600 / 1,000 V
Pigtail splice techniqueFor pigtail splices, wrap beyond the wire ends and fold back to leave a protective cushion against cut-through.
Temperature rating — IEC Type 6-10 to 90 °C
Temperature rating — UL 510-10 to 80 °C
UL 510 flame and cold resistancePass for flame-retardant and cold-resistant performance; sunlight resistance is specifically noted for White only.
VDE mark / IEC classificationVDE mark for Type 6: IEC 60454-3-1-6/F-PVC P/90
Dielectric strength1,000 (39.4 kV/mm) minimum under standard conditions V/mil
Temperature rating — CSA C22.2 No. 197-10 to 105 °C
UL listingUL Listed to UL 510, Standard “Insulating Tape”
Backing materialVinyl (PVC)
Cable repair and splice compatibilityFor cable-jacket repair up to 600 V (UL) / 1,000 V (CSA) as primary insulation; also for mechanical protection over rubber-splicing and mastic tapes on LV/MV/HV joints and splices.
Identification applicationsFor marking safety areas and equipment and identifying cable, phase coding, motor leads, and piping systems.
Primary insulation applicationPrimary insulation on joints and splices in wires and cables under UL 510
Temperature performance range14 to 221 °F
Tensile strengthMinimum 2087 psi / 14.6 lb/in (25.6 N/cm)
Wrapping techniqueApply in half-lapped layers under sufficient tension for a uniform wrap; wrap uphill from smaller to larger diameters and leave the last wrap untensioned to help prevent flagging.

Dimensions & Weight

Tape thickness7 ± 0.7 (0.178 ± 0.018 mm) mil

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 — Regulatory Data Sheet (February 5, 2026) Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 — Article Information Sheet (October 15, 2024) Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.