Skip to content
Scotch

3M Scotch 35 Green Vinyl Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10851

3M Scotch 35 is green vinyl electrical tape in a 3/4-in-wide, 66-ft roll, with 7-mil thickness, PVC film backing, and rubber-resin adhesive. Product data identifies it for phase identification and color coding, motor-lead and piping identification, and safety-area and equipment marking.

  • Green Tape Color
  • 3/4-Inch x 66-Foot Roll
  • UL / CSA Ratings and Listings
  • 7-Mil Tape Thickness
  • PVC Film Backing
  • Rubber-Resin Adhesive

Product Overview

3M Scotch 35 is green vinyl electrical tape in a 3/4-in-wide, 66-ft roll, with 7-mil thickness, PVC film backing, and rubber-resin adhesive. Product data identifies it for phase identification and color coding, motor-lead and piping identification, and safety-area and equipment marking.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10851

Product Information

BrandScotch
MPN10851
SKU10851
UPC / GTIN054007108511
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyGreen
Length (in.)0.875
Width (in.)3.5

Tape & Appearance

Tape Length (ft.)66
Color FamilyGreen
Dielectric strength, standard condition1000 V/mil (39.4 kV/mm) minimum
Temperature rating — CSA C22.2 No. 197-10°C to 105°C (14°F to 221°F)
Temperature rating — IEC 60454-3-1 Type 6-10°C to 90°C (14°F to 194°F)
Flame retardancyPass
CSA listingListed to CSA-C22.2 No. 197, “PVC Insulating Tape”
Maximum voltage rating600 V / 1000 V
Marking and identification applicationsMark safety areas and equipment; identify cable on cell sites, phase-code, and identify motor leads and piping systems
Adhesion to steel16 oz/in (1.8 N/cm) minimum at 73°F (23°C)
AdhesiveNon-corrosive, rubber-based pressure-sensitive adhesive
Wrapping direction and final wrapWrap from smaller to larger diameter; apply the last wrap without tension to help prevent flagging
Cable repair and overwrap applicationsCable-jacket repair (up to 600 V UL / 1000 V CSA as primary insulation); mechanical protection over rubber-splicing and mastic tapes on LV/MV/HV joints and splices
Layering techniqueApply in half-lapped layers with sufficient tension for a uniform wrap
Shelf life and storage conditions5 years from manufacture when stored at 50°F/10°C to 80°F/27°C and below 75% relative humidity
Adhesion to backing16 oz/in (1.8 N/cm) minimum at 73°F (23°C)
Elongation, minimum125 %
Tensile strength, minimum2087 psi
VDE mark / IEC designationType 6; IEC 60454-3-1-6/F-PVC P/90
Insulation resistance, minimum (high humidity)1 × 10^12 ohms
Pigtail splice techniqueOn pigtail splices, wrap beyond the wire ends and fold back to leave a protective cushion against cut-through
Backing materialElastic vinyl (PVC) film
Temperature rating — UL 510-10°C to 80°C (14°F to 176°F)
Dielectric strength under high humidity90% of standard
Primary insulation applicationPrimary insulation for joints and splices in wires and cables
UL listingListed to UL 510, “Insulating Tape”

Dimensions & Weight

Height (in.)3.5
Width (in.)3.5
Length (in.)0.875
Weight (lb.)0.2

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Regulatory Data Sheet Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Article Information Sheet Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023, Rev. L) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.