Skip to content
3M

3M Scotch 35 Orange Vinyl Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10869

3M Scotch 35 Orange is 3/4-inch-wide, 66-foot vinyl electrical tape with 7 mil PVC backing and rubber-resin adhesive, specified for wire color coding and primary splice insulation.

  • 3/4 in × 66 ft roll
  • Primary splice insulation to 600 V
  • Orange color
  • 7 mil PVC backing
  • Rubber-resin adhesive
  • UL 510 flame retardance

Product Overview

3M Scotch 35 Orange is 3/4-inch-wide, 66-foot vinyl electrical tape with 7 mil PVC backing and rubber-resin adhesive, specified for wire color coding and primary splice insulation.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10869

Product Information

Brand3M
MPN10869
SKU10869
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyOrange
Length (in.)3.5
Width (in.)3.5

Tape & Appearance

Tape Length (ft.)66
Color FamilyOrange
Maximum voltage rating600 / 1000 V
Temperature rating (UL 510)14°F to 176°F (-10°C to 80°C)
IEC classification and designationType 6; IEC 60454-3-1-6/F-PVCP/90; thermal index 90°C; minimum temperature -10°C
Minimum adhesion to backing at 73°F (23°C)16 oz/in (1.8 N/cm)
Pigtail splice wrappingOn pigtail splices, wrap beyond the wire ends and fold back to leave a protective cushion against cut-through
Dielectric strength under high humidity90% of standard-condition value
VDE markLicense no. 130462 for Type 6
Minimum adhesion to steel at 73°F (23°C)16 oz/in (1.8 N/cm)
Recommended useReinsulating and color-coding electrical wiring
Backing materialElastic vinyl (PVC) film
CSA listingCSA Listed; CSA-C22.2 No. 197 PVC Insulating Tape, File 048769, Class 9052-02
Temperature rating (CSA C22.2 No. 197)14°F to 221°F (-10°C to 105°C)
Shelf life and storage conditions5 years from manufacture when stored at 50°F/10°C to 80°F/27°C and below 75% relative humidity
Minimum elongation at 73°F (23°C)125 %
Minimum tensile strength2087 psi / 14.6 lb/in (25.6 N/cm)
UL listingUL Listed; UL 510 Insulating Tape, Category OANZ, File E129200
Cable-jacket repair and overwrap useCable-jacket repair up to 600 V (UL) / 1000 V (CSA) as primary insulation; also mechanical protection over rubber-splicing and mastic tapes on LV/MV/HV joints and splices
Marking and cable-identification applicationsSuitable for marking safety areas and equipment and identifying cables on cell sites, for phase coding, motor leads, and piping systems
Minimum dielectric strength, standard condition1000 V/mil (39.4 kV/mm)
Minimum insulation resistance under high humidity1 × 10^12 ohms
Adhesive typeNon-corrosive, rubber-based pressure-sensitive adhesive, coated on one side
Application techniqueApply in half-lapped layers with sufficient tension to produce a uniform wind
UL 510 flame-retardant ratingPass
OSHA hazard classification statusExempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200

Dimensions & Weight

Height (in.)0.85
Width (in.)3.5
Length (in.)3.5
Weight (lb.)0.22

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 — Regulatory Data Sheet (Version 16.05, February 5, 2026) Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 — Article Information Sheet (Version 2.00, March 18, 2026) Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (Rev. L, February 2023) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.