Skip to content
Scotch

3M Scotch 35 Pink Vinyl Color-Coding Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10886

3M Scotch 35 is pink vinyl/PVC electrical tape with a 7 mil thickness, pressure-sensitive rubber-based adhesive, and a 3/4 in. x 66 ft. roll. It is specified for reinsulating and color-coding electrical wiring, with UL 510 primary-insulation conditions covering wire and cable splice insulation up to 600 V under stated conditions.

  • UL 510 Listed for Splices
  • Pink Color-Coding Tape
  • 3/4-Inch x 66-Foot Roll
  • Elastic Vinyl (PVC) Backing
  • Pressure-Sensitive Rubber Adhesive
  • 7 Mil Tape Thickness

Product Overview

3M Scotch 35 is pink vinyl/PVC electrical tape with a 7 mil thickness, pressure-sensitive rubber-based adhesive, and a 3/4 in. x 66 ft. roll. It is specified for reinsulating and color-coding electrical wiring, with UL 510 primary-insulation conditions covering wire and cable splice insulation up to 600 V under stated conditions.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10886

Product Information

BrandScotch
MPN10886
SKU10886
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyPink
Width (in.)0.75

Tape & Appearance

Tape Length (ft.)66
Color FamilyPink
Backing materialElastic vinyl (PVC) film
Dielectric strength at high humidity90% of standard-condition value
UL listingUL 510 Insulating Tape, Category OANZ (File No. E129200)
OSHA hazard classificationExempt from OSHA hazard classification under 29 CFR 1910.1200
UL 510 primary-insulation conditionsUp to 600 V on wire/cable joints and splices; -10°C to 80°C, per NFPA 70
Tensile strengthMinimum 2087 psi / 14.6 lb/in (25.6 N/cm)
California Proposition 65 chemical listingThe AIS lists DINP (CAS 68515-48-0) as a carcinogen under California Proposition 65
Application techniqueApply in half-lapped layers with sufficient tension for a uniform wind
Wrap directionWrap from a smaller-diameter surface to a larger-diameter surface
Minimum elongation at 73°F (23°C)125 %
IEC classification and temperature ratingType 6; designation IEC 60454-3-1-6/F-PVCP/90; thermal index 90°C; minimum temperature -10°C
Adhesive type and constructionNon-corrosive, rubber-based, pressure-sensitive adhesive; coated on one side
Pigtail splice techniqueOn pigtail splices, wrap beyond wire ends and fold back to leave a protective cushion against cut-through
CSA C22.2 No. 197 primary-insulation conditionsUp to 1000 V on wire/cable joints and splices; -10°C to 105°C, per Canadian Electrical Code, Part 1
Insulation resistance at high humidityMinimum 1 × 10¹² ohms
Final-wrap techniqueApply the last wrap without tension to help prevent flagging
Minimum dielectric strength under standard conditionsMinimum 1000 (39.4) V/mil (kV/mm)
Shelf life and storage conditions5 years from manufacture; store at 50°F/10°C to 80°F/27°C and below 75% relative humidity
Recommended useReinsulating and color-coding electrical wiring
VDE mark licenseLicense no. 130462 for Type 6, IEC 60454-3-1-6/F-PVC P/90
CSA listingCSA-C22.2 No. 197 PVC Insulating Tape (File No. 048769, Class 9052-02)
Adhesion to backingMinimum 16 (1.8) at 73°F (23°C) oz/in (N/cm)
Adhesion to steelMinimum 16 (1.8) at 73°F (23°C) oz/in (N/cm)

Dimensions & Weight

Width (in.)0.75
Tape thickness7 ± 0.7 (0.178 ± 0.018) mil (mm)

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Article Information Sheet Other Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Regulatory Data Sheet Certification compliance Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.