Skip to content
3M

3M Scotch 35 Red Vinyl Electrical Tape, 3/4" × 66ft

0 Reviews
SKU
10810

3M Scotch 35 is red, 7 mil vinyl electrical tape supplied in a 3/4 in. × 66 ft. roll, with elastic PVC backing and a one-sided rubber-based pressure-sensitive adhesive. It is specified for wire identification and color coding, primary insulation on splices, and cable-jacket repair, with voltage and temperature limits varying by standard.

  • 3/4 in. × 66 ft. roll
  • Red for wire identification
  • Elastic PVC film backing
  • One-sided rubber-based adhesive
  • Primary insulation voltage limits
  • Standard-specific temperature range

Product Overview

3M Scotch 35 is red, 7 mil vinyl electrical tape supplied in a 3/4 in. × 66 ft. roll, with elastic PVC backing and a one-sided rubber-based pressure-sensitive adhesive. It is specified for wire identification and color coding, primary insulation on splices, and cable-jacket repair, with voltage and temperature limits varying by standard.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10810

Product Information

Brand3M
MPN10810
SKU10810
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyRed
Width (in.)0.75

Tape & Appearance

Tape Length (ft.)66
Color FamilyRed
UL listingUL 510; Category OANZ; File No. E129200
Maximum voltage for UL 510 primary insulation600 V
Adhesion to steel16 (1.8) minimum at 73°F (23°C) oz/in (N/cm)
Adhesive constructionNon-corrosive, rubber-based pressure-sensitive adhesive coated on one side
VDE markLicense no. 130462 for Type 6
Wrap direction and final wrapWrap uphill from smaller to larger diameter; apply no tension on the final wrap to help prevent flagging
Layering and tensionApply in half-lapped layers with sufficient tension to produce a uniform wind
Backing materialElastic vinyl (PVC) film
Tensile strength2087; 14.6; 25.6 minimum psi; lb/in; N/cm
Adhesion to backing16 (1.8) minimum at 73°F (23°C) oz/in (N/cm)
Minimum insulation resistance at high humidity1 × 10¹² ohms
Pigtail splice wrappingOn pigtail splices, wrap beyond the wire ends and fold back to form a protective cushion against cut-through
Maximum voltage for CSA C22.2 No. 197 primary insulation1000 V
Flame-retardant ratingPass under UL 510
IEC 60454-3-1 classification and ratingType 6; designation IEC 60454-3-1-6/F-PVCP/90; thermal index 90°C (194°F); minimum temperature -10°C (14°F)
CSA C22.2 No. 197 temperature range-10 to 105 (14 to 221) °C (°F)
CSA listingCSA-C22.2 No.197; File No. 048769; Class 9052-02
Dielectric strength at high humidity90 % of standard
Shelf life and storage conditions5 from manufacture when stored at 50°F/10°C to 80°F/27°C and below 75% relative humidity years
UL 510 temperature range-10 to 80 (14 to 176) °C (°F)
Application compatibilityFor cable-jacket repair as primary insulation and as mechanical overwrap protection for rubber splicing and mastic tapes on LV/MV/HV joints and splices
Minimum elongation125 %
Minimum dielectric strength at standard condition1000 (39.4) V/mil (kV/mm)

Dimensions & Weight

Width (in.)0.75
Weight (lb.)0.2
Tape thickness7 ± 0.7 (0.178 ± 0.018) mil (mm)

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 — Regulatory Data Sheet (February 5, 2026) Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 — Article Information Sheet (October 15, 2024) Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.