Skip to content
3M

3M Scotch 35 White Vinyl Electrical Tape, 3/4" × 66 ft

0 Reviews
SKU
10828

3M Scotch 35 White is a 3/4 in. × 66 ft. vinyl electrical tape with 7 mil PVC backing and rubber-resin adhesive. It is specified for wire and phase identification and primary splice insulation to 600 V under UL 510.

  • White Color-Coding Tape
  • Primary Splice Insulation to 600 V
  • 3/4 in. × 66 ft. Roll
  • 7 mil PVC Backing
  • Rubber-Resin Adhesive
  • UL and CSA Listings

Product Overview

3M Scotch 35 White is a 3/4 in. × 66 ft. vinyl electrical tape with 7 mil PVC backing and rubber-resin adhesive. It is specified for wire and phase identification and primary splice insulation to 600 V under UL 510.

Technical Specifications

Product information and specifications for the selected item.

SKU: 10828

Product Information

Brand3M
MPN10828
SKU10828
UPC / GTIN00054007108283
CategoryTape, Sealants & Consumables

Key Specs

Tape Length (ft.)66
Color FamilyWhite
Length (in.)2.85
Width (in.)2.85

Tape & Appearance

Tape Length (ft.)66
Color FamilyWhite
Dielectric Strength at High Humidity90% of standard-condition value
Flame Retardancy and Cold Resistance (UL 510)Pass
UL ListingUL Listed to UL 510, Insulating Tape (Category OANZ)
Sunlight Resistance (White)Rated UL Sunlight Resistant
Backing MaterialElastic vinyl (PVC) film
Minimum Insulation Resistance (High Humidity)1 × 10¹² ohms
Minimum Dielectric Strength (Standard Condition)1000 V/mil (39.4 kV/mm)
Minimum Adhesion to Backing16 oz/in (1.8 N/cm)
Temperature Range (CSA C22.2 No. 197)-10 to 105 °C
Maximum Voltage Rating (UL 510)600 V
Wrapping Direction and Final WrapWrap uphill from smaller to larger diameters; apply no tension on the last wrap to help prevent flagging
Application MethodApply in half-lapped layers with sufficient tension to produce a uniform wind
Pigtail Splice WrappingOn pigtail splices, wrap beyond the wire ends and fold back to leave a protective cushion against cut-through
Minimum Tensile Strength2087 psi / 14.6 lb/in (25.6 N/cm)
Temperature Range (UL 510)-10 to 80 °C
Minimum Elongation at 73°F (23°C)125 %
Application CompatibilityMechanical protection by overwrapping rubber-splicing and mastic tapes on LV/MV/HV joints and splices
AdhesiveNon-corrosive, rubber-based pressure-sensitive adhesive
Temperature Range (IEC 60454-3-1, Type 6)-10 to 90 °C
VDE Mark / IEC ClassificationVDE mark for Type 6, IEC 60454-3-1-6/F-PVCP/90
Maximum Voltage Rating (CSA C22.2 No. 197)1000 V
Minimum Adhesion to Steel16 oz/in (1.8 N/cm)
Shelf Life and Storage Conditions5 years from manufacture when stored at 50°F/10°C to 80°F/27°C and below 75% relative humidity
CSA ListingCSA Listed to CSA-C22.2 No. 197, PVC Insulating Tape

Dimensions & Weight

Height (in.)0.85
Width (in.)2.85
Length (in.)2.85
Weight (lb.)0.205

Product Documents

  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Regulatory Data Sheet Certification compliance Open / download file
  • Scotch® Vinyl Electrical Color Coding Tape 35 (Blue, Brown, Gray, Green, Orange, Pink, Red, Violet, White, Yellow) — Article Information Sheet Safety sheet Open / download file
  • Scotch® Vinyl Electrical Tape 35 — Data Sheet (February 2023, Rev L) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.