Skip to content
ABB

ABB CR460XMD Mechanically Held Lighting Contactor Conversion Kit

0 Reviews
SKU
CR460XMD

The ABB CR460XMD is a 2-wire mechanically held lighting-contactor conversion kit specified for CR460 series contactors. It converts an electrically held CR463L series contactor to mechanically held operation and has a 200–277 VAC control input at 50/60 Hz, with listed 24–277 VAC coil compatibility.

  • CR460 Series Compatibility
  • CR463L Conversion
  • Two-Wire Mechanically Held Control
  • 200–277 VAC Control Input
  • 24–277 VAC Coil Compatibility
  • Included NC Auxiliary Contact

Product Overview

The ABB CR460XMD is a 2-wire mechanically held lighting-contactor conversion kit specified for CR460 series contactors. It converts an electrically held CR463L series contactor to mechanically held operation and has a 200–277 VAC control input at 50/60 Hz, with listed 24–277 VAC coil compatibility.

Technical Specifications

Product information and specifications for the selected item.

SKU: CR460XMD

Product Information

BrandABB
MPNCR460XMD
SKUCR460XMD
UPC / GTIN783166621165
CategoryLighting Contactors

Key Specs

Contact TypeN.C.
Height (in.)1

Switching & Electrical

Contact TypeN.C.
Auxiliary contact useAn auxiliary contact block is required for the feedback loop; alternate 2-pole blocks may be required for status feedback and/or pilot lights
Compatible contactor seriesCR460 series lighting contactors only
Terminal tightening torqueControl-module terminals: 7; auxiliary-contact terminals: 7–12. in-lb
Included kit componentsControl module, latch, latch cover, auxiliary contact(s), and installation instructions.
2-wire auxiliary-contact wiringInstall the auxiliary contact on the right side of the base as NC; connect the two control-module wires across that NC contact.
Control-module frequency60/50 Hz
Conversion compatibilityConverts an electrically held CR463L series contactor to a mechanically held contactor
Control-module electrical demand91 mA steady-state current at rated voltage; 30 VA maximum.
Auxiliary contact placementFor 2-wire control, assemble the auxiliary contact block on the base's right side for NC operation
Kit contentsControl module, latch, latch cover, auxiliary contact(s), and installation instructions
Certificate model category and standardsCertificate model lists include CR460XMD under Magnetic Motor Controllers; the US certificate cites UL 60947-4-1 and UL 60947-1, and the Canada certificate cites CSA C22.2 No. 60947-1 and No. 60947-4-1.
Terminal wire range22–12, solid or stranded AWG
Control wiring requirementConnect the two control-module wires across an NC auxiliary contact
Required latch/module pairingUse the latch and electronic module together for proper operation; using them separately voids the warranty.
Control input frequency60/50 Hz
Latch-cover installationVerify latch placement and manually operate the contactor using the side tabs before fitting the cover; the installed cover cannot be removed.
Supported contactor seriesFor CR460 series lighting contactors only; converts an electrically held CR463L series contactor to mechanically held.

Dimensions & Weight

Height (in.)1
Width (in.)2
Length (in.)2.75
Weight (lb.)0.6

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.