Skip to content
Advance

Advance SmartMate Programmed-Start CFL Ballast, 2 × 18W, 120–277VAC

0 Reviews
SKU
ICF-2S18-H1-LD

The Advance SmartMate ICF-2S18-H1-LD is an electronic programmed-start ballast for two 18 W, 4-pin compact fluorescent lamps. It accepts 120–277 VAC at 50/60 Hz and uses color-coded poke-in wire-trap connectors.

  • Two 18 W, 4-pin CFL lamps
  • 120–277 VAC, 50/60 Hz input
  • Programmed-start operation
  • Philips InstantFit LED compatibility
  • Color-coded poke-in connectors
  • 0°F minimum starting temperature

The Advance SmartMate ICF-2S18-H1-LD is an electronic programmed-start ballast for two 18 W, 4-pin compact fluorescent lamps. It accepts 120–277 VAC at 50/60 Hz and uses color-coded poke-in wire-trap connectors.

Product Overview

The Advance SmartMate ICF-2S18-H1-LD is an electronic programmed-start ballast for two 18 W, 4-pin compact fluorescent lamps. It accepts 120–277 VAC at 50/60 Hz and uses color-coded poke-in wire-trap connectors.

  • Two 18 W, 4-pin CFL lamps
  • 120–277 VAC, 50/60 Hz input
  • Programmed-start operation
  • Philips InstantFit LED compatibility
  • Color-coded poke-in connectors
  • 0°F minimum starting temperature

Technical Specifications

Product information and specifications for the selected item.

SKU: ICF-2S18-H1-LD

Product Information

BrandAdvance
MPNICF-2S18-H1-LD
SKUICF-2S18-H1-LD
CategoryLED Drivers & Ballasts

Key Specs

Wattage Range18 W
Voltage120V-277V

Electrical

Wattage Range18 W
Voltage120V-277V
GroundingGreen terminal must be grounded.
Maximum THD in two-lamp configurations10 %
Input power (ANSI, 2 × CFM18W/GX24q lamps)39 at 120 V; 39 at 277 V ANSI W
Maximum total harmonic distortion (2 × CFM18W/GX24q lamps)10 max %
Sustained voltage/frequency variation tolerance±10 %
Input frequency50/60 Hz
Maximum lamp current crest factor1.5
Lamp connectionSeries
Input current (2 × CFM18W/GX24q lamps)0.33 at 120 V; 0.14 at 277 V
Lamp operating frequencyAbove 42 kHz; specified to avoid infrared-device interference and visible flicker.
Power factor0.99 for two-lamp operation
Grounding instructionGreen terminal must be grounded

Light Output

Ballast factor (2 × CFM18W/GX24q lamps)1.05

Compatibility & Operation

Product typeCompact Fluorescent (CFL) Ballasts
Starting MethodProgrammed Start
Lamp end-of-life protectionIncludes a lamp end-of-life protection circuit.
Connector codingPoke-in wire-trap connectors are color coded.
InstantFit LED lamp compatibilityThe guide marks both listed Philips InstantFit LED lamp options System Certified.
Remote lamp-lead limit15 ft maximum; tandem and through wiring are marked NA.
Ballast interchangeabilityPhysically interchangeable with standard electromagnetic or standard electronic ballasts, where applicable.
Connector stylePoke-in wire-trap connectors; color-coded
Automatic restartRestarts lamps without resetting power.
Lead-wire configurationNo lead wires; poke-in connectors.
Minimum starting temperature-18 °C (0 °F)
Output fault toleranceTolerates sustained open- and short-circuit output conditions.

Certifications & Warranty

Ratings & CertificatesROHS, UL Listed
Warranty5 Years
PCB contentDoes not contain polychlorinated biphenyls (PCBs).

Dimensions & Weight

Height (in.)1
Width (in.)2.4
Length (in.)4.98
Weight (lb.)0.4

Product Documents

  • LED Lamps InstantFit Ballast Compatibility Guide Certification compliance Open / download file
  • Warranty Components (Lamps, Drivers, Ballasts & Modules) — North America Warranty Open / download file
  • Philips Advance Atlas 2016 Catalog — SmartMate Electronic Ballasts for 4-Pin CFL Lamps Spec sheet Open / download file
  • ICF-2S18-H1-LD ELE BALLAST (2) 18W CFL (4-PIN) 120-277V — Electrical Specifications Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.