Skip to content
American Rotary

American Rotary AD20F 20HP Digital Rotary Phase Converter, Floor-Mount Unit

0 Reviews
SKU
AD20F

The American Rotary AD20F is a 20 HP digitally controlled rotary phase converter in a floor-mount configuration. It accepts single-phase input and provides delta three-phase output, with listed maximum running and starting loads of 20 HP / 56 A and 10 HP / 28 A, respectively.

  • 20 HP / 56 A maximum running load
  • Single-phase input voltage and frequency
  • 10 HP / 28 A maximum starting load
  • Delta three-phase output
  • Resistive, inductive, and multiple-motor loads
  • Floor-mount unit dimensions and weight

Product Overview

The American Rotary AD20F is a 20 HP digitally controlled rotary phase converter in a floor-mount configuration. It accepts single-phase input and provides delta three-phase output, with listed maximum running and starting loads of 20 HP / 56 A and 10 HP / 28 A, respectively.

Technical Specifications

Product information and specifications for the selected item.

SKU: AD20F

Product Information

BrandAmerican Rotary
MPNAD20F
SKUAD20F
UPC / GTIN850057160338
CategoryFasteners & Hardware

Key Specs

Weight Capacity (lb.)150 - 300
Interior/ExteriorInterior

Capacity & Fastener

Weight Capacity (lb.)150 - 300
Minimum recommended single-phase breaker60 A
Minimum recommended three-phase output wire size (idler + load)10 AWG
Minimum recommended single-phase input wire size6 AWG
Largest load for optimal performance10 HP
Three-phase output configurationDelta
Output voltage behaviorOutput voltage stays close to input voltage; a transformer is needed for a different voltage.
Input voltage range208–240 V
Power factor correctionBuilt-in
Input frequency50 / 60 Hz
Idler/start designBaldor-made, current-limiting soft-start generator/idler.
Efficiency at 0.9 power factor>98 %
Single-phase power when offSingle-phase legs remain energized when the converter is off.
Output voltage balance0 – 5 %
Maximum starting load10 HP / 28 amps
Restart protectionBuilt-in starter with Power Guard restart protection.
Maximum running load20 HP / 56 amps

Finish & Use

Interior/ExteriorInterior
Measurement SystemInches
Start/load sequencingDisconnect loads, including transformers, before starting; start the converter before applying loads.
Wye/neutral compatibilityA delta-wye transformer is required for wye voltage and a neutral connection.
Control-panel enclosure ratingNEMA Type 1
Installation ambient temperature guidanceAvoid ambient temperatures exceeding 50. °C
Supported load typesResistive, inductive, and multiple-motor loads, in any combination.
Control-circuit wiringUse L1/T1 and L2/T2 for controls; do not use manufactured line T3 for single-phase controls or loads.
Idler mountingMount on the provided rubber isolation feet; do not bolt down the idler motor.

Dimensions & Weight

Width (in.)13.5
Length (in.)19.3
Weight (lb.)266
Idler bearing size6208

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.