The Appleton U-Line EFSR-2023 is a gray aluminum replacement cover for a factory-sealed 20 A, 125 VAC, 1 HP, 2-wire/3-pole receptacle. It has an epoxy powder-coat finish and measures 3 in. W Ă— 4.63 in. H Ă— 3.13 in. L.
For Factory-Sealed 20A Receptacles
Copper-Free Aluminum
Cover Dimensions
Gray Epoxy Powder-Coat Finish
Spring-Loaded Gasket Closure
Enclosed Stainless-Steel Spring
The Appleton U-Line EFSR-2023 is a gray aluminum replacement cover for a factory-sealed 20 A, 125 VAC, 1 HP, 2-wire/3-pole receptacle. It has an epoxy powder-coat finish and measures 3 in. W Ă— 4.63 in. H Ă— 3.13 in. L.
The Appleton U-Line EFSR-2023 is a gray aluminum replacement cover for a factory-sealed 20 A, 125 VAC, 1 HP, 2-wire/3-pole receptacle. It has an epoxy powder-coat finish and measures 3 in. W Ă— 4.63 in. H Ă— 3.13 in. L.
For Factory-Sealed 20A Receptacles
Copper-Free Aluminum
Cover Dimensions
Gray Epoxy Powder-Coat Finish
Spring-Loaded Gasket Closure
Enclosed Stainless-Steel Spring
Technical Specifications
Product information and specifications for the selected item.
SKU: EFSR-2023
Product Information
Brand
Appleton
MPN
EFSR-2023
SKU
EFSR-2023
UPC / GTIN
781381288057
Category
Device Accessories
Accessory & Compatibility
Flange installation requirements
Mating flange surfaces must be unscratched, clean and flat; no gaskets, paint or similar material may be used in the joint.
Cover material composition
Copper-free aluminum; copper content 4/10 of 1% max.
Mounting screw torque
30 in-lb
Operating action
A 37° clockwise rotation closes the internal contacts and mechanically locks the plug in place.
Cover spring construction
The stainless-steel cover spring is completely enclosed for protection from corrosive environments.
Contact safety
Energized contacts are deeply recessed to reduce accidental touching.
UL/CSA compliance
UL Listed E10784, E81751; UL Standards 1203, 1010, 894; CSA Certified 038644; CSA Standards C22.2 No. 25, 30, 42 and C22 No. 159.
Minimum conductor
Minimum #12 copper or copper-clad building wire
Internal sealing
Factory-sealed receptacle/switch interior; aluminum sleeve sealed at both ends with neoprene O-rings to protect against moisture.
Electrical rating
125 Vac, 20 A, 1 HP
Contact construction
Blade-type brass contacts exert constant pressure along the contact surface.
Grounding method
Grounded through an extra pole and through the receptacle housing.
Wire terminal screw torque
20 in-lb
Enclosure rating
NEMA 3RX when the spring-loaded cover is installed and closed.
Cover sealing
When not in use, the spring-loaded cover seats against a neoprene gasket.
Safety construction
Dead-front safety construction
Current rating
20 A
Hazardous-location classification
Class I, Divisions 1 and 2, Groups B, C, D; Class II, Divisions 1 and 2, Groups F, G; Class III
External seal placement
Seals are not furnished; place within 2 in. of each conduit opening. Not required in Class I, Div. 2 locations.
Wire/pole configuration
2W, 3P
Class I, Div. 1 Group B condition
Class I, Div. 1, Group B suitability requires external seals adjacent to each conduit entrance.
Hazardous-location protection
Explosionproof, dust-ignitionproof
Voltage rating
125 V AC
Color & Finish
Color Family
Gray
Finish
Epoxy powder coat
Dimensions & Weight
Height (in.)
4.63
Width (in.)
3
Length (in.)
3.13
Weight (lb.)
1.35
Product Documents
Appleton™ U-Line™ Factory Sealed 20 Amp Plugs and Receptacles (July 2018 catalog)
Other
Open / download file
U-Line®, Contender® U-Line®, EFS/EFSR/ENR Series Installation and Maintenance Instruction, Sheet 330062-1 Rev. A
Installation manual
Open / download file
U-Line® Factory Sealed 20 Amp Aluminum Receptacles — Specification Sheet (October 2012, p. 826)
Spec sheet
Open / download file