Skip to content
ASCO

ASCO 7000 Series 800A 480V 3-Pole Closed-Transition Bypass-Isolation Automatic Transfer Switch

0 Reviews
SKU
H7ACTBB30800N5XC

The ASCO 7000 Series H7ACTBB30800N5XC is an automatic transfer switch rated for 800 A at 480 V, with a three-pole configuration, closed-transition operation, bypass isolation, switched neutral, and a Type 1 enclosure. Its specified closed-transition source overlap time is less than 100 ms.

  • 800 A Rating
  • 480 V, Three-Pole Configuration
  • Closed-Transition Operation
  • Bypass-Isolation Capability
  • Switched Neutral
  • Type 1 Enclosure

Product Overview

The ASCO 7000 Series H7ACTBB30800N5XC is an automatic transfer switch rated for 800 A at 480 V, with a three-pole configuration, closed-transition operation, bypass isolation, switched neutral, and a Type 1 enclosure. Its specified closed-transition source overlap time is less than 100 ms.

Technical Specifications

Product information and specifications for the selected item.

SKU: H7ACTBB30800N5XC

Product Information

BrandASCO
MPNH7ACTBB30800N5XC
SKUH7ACTBB30800N5XC
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)800
Automatic/ManualAutomatic

Electrical Ratings

Maximum Amperage (A)800
Standard terminal lug typeStandard mechanical, screw-type lugs on Normal, Emergency, and Load
Cable capacity per terminalFour 1/0–750 MCM Cu/Al cables per terminal
Lug material and finishAluminum alloy 6061-T6, electro-tin-plated
Rated operating frequency50 or 60 Hz
Field terminal block wire range22–12 AWG
Rated voltage480 V
Lug screw tightening torque375 in-lb
Ground bus20% rated; at bottom rear of cable compartment
Neutral configurationSwitched neutral
Engine-start contact rating5 at 32 VDC / 120 VAC, resistive

Transfer & Features

Automatic/ManualAutomatic
Enclosure typeType 1
Closed-transition source overlap timeLess than 100 ms
Voltage sensingRMS sensing on all phases of Normal and Emergency sources
Nominal voltage and frequency setupFactory pre-programmed from nameplate data
Isolation-handle padlockingIsolation handle can be padlocked when the transfer switch is fully isolated (disconnected)
Time-delay adjustment range0–60 min 59 s; 1-s increments unless stated otherwise
ControllerGroup 5
Standard finishASA 61 gray, polyester powder
Contact overlap timeLess than 0.1
Door constructionPan-type doors with lockable handles and removable covers

Dimensions & Weight

Mounting holes4 holes, Ø0.625 in
Recommended clearanceFront 48; rear 36 in
Frame and mounting constructionFree-standing, floor-mounted; 12-gauge formed frame
Top/bottom conduit entrance area30 × 12 in (W × D)

Product Documents

  • Outline and Mounting for ASCO 7000 Series H7ATB, H7ACTB and H7ADTB, 600–1200 A (736939) Drawing photometric Open / download file
  • Three-Phase Wiring for ASCO 7000 Series Automatic Closed-Transition Transfer and Bypass-Isolation Switches, Type H7ACTB, 600–1200 A (736943) Drawing photometric Open / download file
  • Operator's Manual — ASCO 7000 Series ACTB, H Design, 600–1200 A (381333-194 B) Manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.