Skip to content
Axis Lighting

Axis Lighting Extend 4 Surface LED Linear Luminaire, 18ft System Run

0 Reviews
SKU
EX4S-900-80-40-SO-18'-BLK-UNV-DP-1-SB-EF

The Axis Lighting Extend 4 is a black, surface-bracket-mounted LED linear luminaire specified as an 18-foot multi-section system run, with an integrated LED and spotless lens. It delivers 900 lm/ft at 4000K and 80 CRI, with universal voltage, 0–10V 1% dimming, a single circuit, and hardwired end feed. The luminaire is linkable and wet-rated for uncovered outdoor use.

  • 18-Foot Multi-Section Run
  • Wet-Rated for Uncovered Outdoor Use
  • 900 lm/ft Output
  • Universal Voltage
  • 0–10V, 1% Dimming
  • 4000K CCT, 80 CRI

Product Overview

The Axis Lighting Extend 4 is a black, surface-bracket-mounted LED linear luminaire specified as an 18-foot multi-section system run, with an integrated LED and spotless lens. It delivers 900 lm/ft at 4000K and 80 CRI, with universal voltage, 0–10V 1% dimming, a single circuit, and hardwired end feed. The luminaire is linkable and wet-rated for uncovered outdoor use.

Technical Specifications

Product information and specifications for the selected item.

SKU: EX4S-900-80-40-SO-18'-BLK-UNV-DP-1-SB-EF

Product Information

BrandAxis Lighting
MPNEX4S-900-80-40-SO-18'-BLK-UNV-DP-1-SB-EF
SKUEX4S-900-80-40-SO-18'-BLK-UNV-DP-1-SB-EF
CategoryStrip Lights & Wraparound Fixtures

Key Specs

Actual Color Temperature (K)4000
Dimmable Capability0-10-Volt Dimming
Damp/Wet RatingWet Rated (Uncovered Outdoor)

Light Output

Actual Color Temperature (K)4000
LED Life / Lumen MaintenanceMinimum 50,000; 85% lumen maintenance hours; percent

Electrical

Power SourceHardwired
Power isolation before serviceTurn off the fixture circuit before servicing.
End-feed junction boxUse a water-tight junction box supplied by others for end-feed wiring.
Power-entry bracketMount the gasketed bracket over the junction box at the power entry.
Power cable length3 ft
Section-joining connectorRoute the quick connector inside the second fixture when joining sections.
Driver replacementThe driver can be replaced after removing the cartridge.

Controls & Bulbs

Dimmable Capability0-10-Volt Dimming
Light Bulb Type IncludedIntegrated LED

Ratings & Use

Damp/Wet RatingWet Rated (Uncovered Outdoor)
Junction-box supportJunction boxes must be fixed to the ceiling and attached to the structure inside the ceiling before installation.
Mounting fastenersBracket anchors are for 10-24 screws.
Impact RatingIK10
Installer qualificationInstallation by a qualified electrician in accordance with national and local building and electrical codes.
DP Driver Ambient Operating Temperature-22°F to 104°F
Wet-Location CertificationUL and CUL

Features & Finish

FeaturesDimmable, Linkable, Water Resistant
Color/Finish FamilyBlack
External Fastener TORX SizeT20
Finish ProcessPowder coated
Limited Warranty Term5 years
End-plate sealingEnd plates are reattached with end gaskets.
Joiner hardwareJoiners are secured with plates, gaskets, and screws.
Service fastenerTamper-proof screws use a Torx T20 screwdriver.
Lens MaterialExtruded acrylic
Housing MaterialExtruded aluminum
Joiner-gasket materialRubber

Dimensions & Weight

System Run Section Length4 to 8 ft
Minimum side clearance9 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.