Skip to content
nVent CADDY

B18-Z Box/Conduit Hanger with Rod/Wire Clip, 1/2" & 3/4" EMT, 3/8" Rod

0 Reviews
SKU
812MB186

The nVent CADDY B18-Z is a spring-steel box/conduit hanger with a rod/wire clip for 1/2-inch and 3/4-inch EMT and 3/8-inch rod. It supports an electrical box and/or conduit from drop wire or rod in single- or multiple-run configurations.

  • Fits 1/2-Inch and 3/4-Inch EMT
  • 3/8-Inch Plain or Threaded Rod
  • Electrical Box and/or Conduit Support
  • Single or Multiple Conduit Runs
  • Spring Steel and nVent CADDY Armour Finish
  • UL and CSA Standards; NEC and CEC Compliance

Product Overview

The nVent CADDY B18-Z is a spring-steel box/conduit hanger with a rod/wire clip for 1/2-inch and 3/4-inch EMT and 3/8-inch rod. It supports an electrical box and/or conduit from drop wire or rod in single- or multiple-run configurations.

Technical Specifications

Product information and specifications for the selected item.

SKU: 812MB186

Product Information

BrandnVent CADDY
MPN812MB186
SKU812MB186
UPC / GTIN782856520054
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Hanging Mount
Pipe/Rod Size (in.)3/8 in

Support & Fit

Pipe Hangers & Supports TypePipe Hanging Mount
Pipe/Rod Size (in.)3/8 in
Conduit Run ApplicationSingle and multiple conduit runs
Conduit/cable clip closureSnap the clip closed around the conduit/cable after it is installed in the box.
MaterialSpring Steel
U.S. safety standardUL 514A, 11th Ed.
Conduit run configurationIntended for single or multiple conduit runs; for a single run, the extra leg may be bent or removed if needed.
CertificationcULus
Drop-wire installation noteMay require a dedicated drop wire/rod; consult local authority.
Box mounting procedureUse two screws to mount a box to the B18 bar; if threaded rod passes through both the B18 and box, additional screws are not needed.
FinishnVent CADDY Armour
Permitted EnvironmentNon-corrosive indoor environment only
Rod compatibilityPlain or threaded rod
Support ApplicationSupports an electrical box and/or conduit from drop wire or rod
Box Mounting FastenersTwo self-tapping screws (SMS8)
Conduit/Cable RetentionSnap clips closed around conduit/cable after installation in the box
Attachment procedureCompress the fastener, place its top edge over wire/rod or a flange edge, then twist into place and squeeze.
Code ComplianceNEC® and CEC compliant
Flange attachment range1/4–3/8 in.
Attachment MethodSqueeze fastener over wire, rod, or flange edge; twist into place and squeeze
Canadian safety standardCSA C22.2 No. 18.1-13, 2nd Ed.

Product Documents

  • UL Certificates of Compliance — QCIT Outlet Box Conduit Supports (U.S. and Canada) Certification compliance Open / download file
  • B18 Series Combination Box and/or Conduit/Cable Hangers from Drop Wire/Rod and Beam — Instruction Sheet (CFS223) Installation manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.