Skip to content
Black Jack

Black Jack All-Weather Roof Cement, 10 oz

0 Reviews
SKU
BLACK JACK ALL-WEATHER ROOF CEMENT 10OZ

Black Jack All-Weather Roof Cement is a black, fiber-reinforced asphalt cement with a pliable, thick trowel-grade formula for exterior roof repairs on damp or dry surfaces. The product specification lists a 10 fl oz (296 mL) fill and approximately 25 linear ft of coverage per tube with a 1/4-in bead.

  • Fiber-Reinforced Asphalt
  • Damp- or Dry-Surface Repairs
  • Approx. 25 Linear ft per Tube
  • Pliable Trowel-Grade Formula
  • 10 fl oz Fill
  • 4–8 Hour Set; 24–48 Hour Cure

Product Overview

Black Jack All-Weather Roof Cement is a black, fiber-reinforced asphalt cement with a pliable, thick trowel-grade formula for exterior roof repairs on damp or dry surfaces. The product specification lists a 10 fl oz (296 mL) fill and approximately 25 linear ft of coverage per tube with a 1/4-in bead.

Technical Specifications

Product information and specifications for the selected item.

SKU: BLACK JACK ALL-WEATHER ROOF CEMENT 10OZ

Product Information

BrandBlack Jack
MPNBLACK JACK ALL-WEATHER ROOF CEMENT 10OZ
SKUBLACK JACK ALL-WEATHER ROOF CEMENT 10OZ
CategoryTape, Sealants & Consumables

Key Specs

Color FamilyBlack
Length (in.)2
Width (in.)2

Tape & Appearance

Color FamilyBlack
Storage, handling, and clean-upProtect from freezing; do not heat or thin; do not store above 100°F. Clean tools or spills with mineral spirits.
Coverage rateApproximately 25 linear ft per tube using a 1/4-in bead.
PaintabilityNot paintable.
Application method and repair buildTrim the nozzle, puncture the seal, and load the cartridge into a caulk gun; spread with a small trowel or putty knife as needed. Apply about 1/8–1/2 in thick, extending 2–3 in beyond the repair; patching fabric is recommended.
Flash point105°F (closed cup)
Set and cure time4–8 hours to set; 24–48 hours to cure.
Use conditions and substrate restrictionsExterior use only; suitable for wet or dry application. Do not use on EPDM, Hypalon, PVC, single-ply or synthetic roofs, or in drinking-water or food systems. The sheet cautions against flat surfaces with poor drainage or ponding water.
Hazard classificationThe 2014 SDS classifies it as flammable liquid Category 3, skin irritation Category 2, eye irritation Category 2A, and carcinogenicity Category 1A.
Construction characteristicsManufacturer describes the cement as fiber reinforced and thick trowel grade.
CompositionAsphalt 40–50 wt%; mineral spirits 8–20 wt%; cellulose 2–6 wt%; bentonite 10–25 wt%; 1,2,4-trimethylbenzene <1 wt%; benzene, 1,3,5-trimethyl <1 wt%; surfactant <0.5 wt%. % by weight
VOC content<200 g/L VOC by volume
Physical formLiquid/paste; described as a thick, semi-liquid paste.
Cure before reflective coatingAllow at least 30–60 days before applying reflective coating.
Application temperature and preconditioningApply at surface temperatures of 50–120°F. At 50°F or below, store the product at 70–80°F for at least 24 hours before application. °F; hours

Dimensions & Weight

Height (in.)11.5
Width (in.)2
Length (in.)2
Fill level10 fl oz (296 mL) fl oz; mL
Specific gravity1.046 (water = 1) dimensionless

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.