Skip to content
Bodine

Bodine B50ELC Fluorescent Emergency Ballast

0 Reviews
SKU
B50ELC

The Bodine B50ELC is a 1200 lm fluorescent emergency ballast for T8/T12 lamps, with a 120V–277V voltage range and at least 90 minutes of operation for one or two lamps. It is compatible with most single- and multi-lamp electronic and dimming AC ballasts, can be used in emergency-only fixtures without an AC ballast, and delays AC ballast restart by about 3 seconds after power restoration to help prevent false end-of-lamp-life shutdown trips.

  • 1200-Lumen Emergency Output
  • 90-Minute Emergency Operation
  • T8/T12 Fluorescent Lamp Compatibility
  • 120V–277V Voltage Range
  • AC Ballast Compatibility
  • cULus and Damp-Location Rating

The Bodine B50ELC is a 1200 lm fluorescent emergency ballast for T8/T12 lamps, with a 120V–277V voltage range and at least 90 minutes of operation for one or two lamps. It is compatible with most single- and multi-lamp electronic and dimming AC ballasts, can be used in emergency-only fixtures without an AC ballast, and delays AC ballast restart by about 3 seconds after power restoration to help prevent false end-of-lamp-life shutdown trips.

Product Overview

The Bodine B50ELC is a 1200 lm fluorescent emergency ballast for T8/T12 lamps, with a 120V–277V voltage range and at least 90 minutes of operation for one or two lamps. It is compatible with most single- and multi-lamp electronic and dimming AC ballasts, can be used in emergency-only fixtures without an AC ballast, and delays AC ballast restart by about 3 seconds after power restoration to help prevent false end-of-lamp-life shutdown trips.

  • 1200-Lumen Emergency Output
  • 90-Minute Emergency Operation
  • T8/T12 Fluorescent Lamp Compatibility
  • 120V–277V Voltage Range
  • AC Ballast Compatibility
  • cULus and Damp-Location Rating

Technical Specifications

Product information and specifications for the selected item.

SKU: B50ELC

Product Information

BrandBodine
MPNB50ELC
SKUB50ELC
CategoryLED Drivers & Ballasts

Key Specs

Voltage120V-277V
Lumens Range1200 lm
Tube Shape/TypeT8, T12

Electrical

Voltage120V-277V
Branch-circuit requirementThe emergency ballast and AC ballast must be fed from the same branch circuit.
Battery capacity28.8 Wh
Output typeSupports AC or DC output.
AC input current60 mA

Light Output

Lumens Range1200 lm

Compatibility & Operation

Tube Shape/TypeT8, T12
Product typeEmergency Ballasts
AC ballast compatibilityCompatible with most single- and multi-lamp electronic and dimming AC ballasts.
Emergency-only fixture useCan be used in emergency-only fixtures without an AC ballast.
Fixture switching requirementDoes not affect normal fixture operation; switched or unswitched fixtures may be used, but switched fixtures require an unswitched hot lead.
Remote mounting limitRemote installation is limited to half the AC ballast manufacturer's recommended lamp-remoting distance or 50 feet, whichever is less.
Fixture and location suitabilitySuitable for sealed and gasketed fixtures; not suitable for heated-air outlets or wet or hazardous locations.
Mounting optionsMay be installed inside, on top of, or remote from the fixture.
Battery serviceabilityThe sealed battery is not field-replaceable.
Recharge time24 hours
Case constructionGalvanized metal case contains the battery, charger, and electronic circuitry.
Battery life expectancy7 to 10 years
Battery constructionHigh-temperature, maintenance-free nickel-cadmium battery.
Emergency-mode operationAutomatically switches to internal-battery power on failure and operates one or two lamps for at least 90 minutes.
AC ballast restart delayDelays AC ballast operation for 3 seconds after power is restored to prevent false end-of-lamp-life shutdown trips.
Test and charging indicatorsTwo-wire illuminated test switch with LED charging indicator.
Emergency illumination duration90 minutes
Emergency lamp count1 or 2 lamps
AC restoration delay for end-of-lamp-life protectionApproximately 3 seconds
Battery chemistryNickel-cadmium battery
Compatible normal AC ballast typesElectronic, standard, energy-saving, and dimming AC ballasts
Two-lamp mode limitationTwo-lamp emergency operation is not supported with every ballast; consult the factory for ballast configurations not shown.

Certifications & Warranty

Ratings & CertificatesCULUS, Damp Location

Dimensions & Weight

Weight (lb.)3

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.