The nVent CADDY B18 is an 18-inch combination box/conduit hanger specified for 1/2–3/4-inch EMT. Its spring-steel body has a pregalvanized finish and a plain 1/4-inch center hole for screw or threaded-rod mounting. The screw is not included.
Combination Box/Conduit Hanger
1/2–3/4-Inch EMT Range
18-Inch Length
Plain 1/4-Inch Center Hole
Spring Steel, Pregalvanized Finish
Screw Not Included
The nVent CADDY B18 is an 18-inch combination box/conduit hanger specified for 1/2–3/4-inch EMT. Its spring-steel body has a pregalvanized finish and a plain 1/4-inch center hole for screw or threaded-rod mounting. The screw is not included.
The nVent CADDY B18 is an 18-inch combination box/conduit hanger specified for 1/2–3/4-inch EMT. Its spring-steel body has a pregalvanized finish and a plain 1/4-inch center hole for screw or threaded-rod mounting. The screw is not included.
Combination Box/Conduit Hanger
1/2–3/4-Inch EMT Range
18-Inch Length
Plain 1/4-Inch Center Hole
Spring Steel, Pregalvanized Finish
Screw Not Included
Technical Specifications
Product information and specifications for the selected item.
SKU: 812MB18A
Product Information
Brand
nVent CADDY
MPN
812MB18A
SKU
812MB18A
UPC / GTIN
782856520023
Category
Hangers & Supports
Key Specs
Pipe Hangers & Supports Type
Pipe Hanging Mount
Length (in.)
18
Width (in.)
2.1
Support & Fit
Pipe Hangers & Supports Type
Pipe Hanging Mount
Code compliance
NEC® and CEC compliant
UL/CSA safety standards
UL 514A, 11th Ed.; CSA C22.2 No. 18.1-13, 2nd Ed.
Mounting hardware
Threaded rod uses a nut and washer against the box and hanger; screw or stud uses a nut only opposite the screw head.
Support and run requirements
NEC® 300.11 requires dedicated drop wire/rod; intended for single and multiple conduit runs.
Support arrangement
One assembly supports a horizontal electrical box and/or conduit from threaded rod.
Installation application
For overhead electrical-box and conduit installation using a single-threaded rod drop
Finish
Pregalvanized; nVent CADDY Armour
Conduit routing
Eliminates the need for offset bending of conduit
Screw included
No
UL certification coverage
Included in a UL certificate of compliance
Dedicated drop support requirement
NEC® 300.11 requires dedicated drop wire/rod
Material
Steel, spring steel
Built-in support function
Built-in first means of support
Application
For overhead electrical-box and conduit installation using a single-threaded rod drop.
Required environment
Use only in a non-corrosive indoor environment
Breakaway feature
The scoreline breakaway feature can be modified by hand while maintaining UL listing.
Operating environment
Spring-steel components are for non-corrosive indoor environments only.
Mounting method
A screw or threaded rod passes through the box and hanger center hole.
Mounting attachment
Center hole for screw or threaded-rod mounting
Scoreline modification
Breakaway scoreline can be modified by hand while maintaining UL listing
Fastener securing
For threaded rod, use a nut and washer against the box and hanger; for screw or stud, a nut is needed only opposite the screw head
Conduit run configuration
For single and multiple runs of conduit
Dimensions & Weight
Height (in.)
2.012
Width (in.)
2.1
Length (in.)
18
Product Documents
UL Certificate of Compliance — B18 Series Outlet Box Conduit Supports (U.S. and Canada)
Certification compliance
Open / download file
B18 Series Combination Box and/or Conduit/Cable Hangers from Drop Wire/Rod and Beam — Instruction Sheet
Installation manual
Open / download file