Skip to content
CANTEX

CANTEX 3" PVC Male Terminal Adapter

0 Reviews
SKU
PC300

The CANTEX PC300 is identified in the product data as a 3 PVC connector. Associated CANTEX specifications describe a solvent-weld female end, a threaded male end, a locknut connection to a box or other threaded body, and a nonconductive electrical property.

  • 3 PVC Connector
  • Solvent-Weld Female and Threaded Male Ends
  • Locknut Box Connection
  • Nonconductive
  • UL 651 Listed
  • NEMA TC3 Compliance

Product Overview

The CANTEX PC300 is identified in the product data as a 3 PVC connector. Associated CANTEX specifications describe a solvent-weld female end, a threaded male end, a locknut connection to a box or other threaded body, and a nonconductive electrical property.

Technical Specifications

Product information and specifications for the selected item.

SKU: PC300

Product Information

BrandCANTEX
SKUPC300
CategoryConduit Fittings

Technical Details

Fitting TypeAdapter
Conduit CompatibilityPVC
Trade Size (in.)3 in
MaterialPVC
Height (in.)3.938
Width (in.)3.938
Length (in.)3
Weight (lb.)0.4

TA30 · Mechanical

Impact and tensile strengthHigh impact and high tensile strength.

5140110 · Installation

Additional connection useCan connect PVC conduit to a box or other threaded body using a lock nut
Box mountingCan connect conduit to a box or other threaded body using a lock nut
Connection applicationTransitions a spigot-end PVC conduit to a threaded metal or PVC-plastic female bell end
NEC referenceNEC Article 352 is referenced for use

5140110 · Compliance

CSA certificationCSA certified
UL listingUL listed to UL 651
NEMA standardMeets NEMA TC3 requirements
Applicable standardNEMA TC-3

TA30 · Environmental Performance

Seal performanceCreates a concrete and watertight seal in all weather conditions.

TA30 · Installation

Enclosure attachmentConnection to a junction box or other threaded body uses a lock nut.
Solvent-cement cureAllow 24 hours for full cure; the fully cured joint is waterproof.
Conduit joint methodJoin Kraloy fittings to PVC conduit using Kraloy solvent cement.
Joining methodSolvent-cemented connection; Kraloy solvent cement is specified.

TA30 · Environmental Durability

Weathering and biological resistanceRetains original properties after exposure to direct sunlight, heat, and extreme weather; resistant to fungi, bacterial action, rodents, and termites.

5140110 · Construction

Corrosion resistanceWill not rust or corrode
End diameter relationshipBoth ends fit the same diameter conduit
End configurationOne solvent-weld female end and one threaded male end

TA30 · Compliance

UL listingUL Listed
Applicable standardsCSA C22.2 No. 85; UL 514B; NEMA TC3
CSA markCSA certification mark shown on the TA30 drawing
Published standardsCSA C22.2 No. 85; UL 651

5140110 · Electrical

Electrical propertyNon-conductive
Electrical conductivityNon-conductive

TA30 · Construction

Male-end thread configurationThreaded male end

TA30 · Durability

Corrosion resistanceResistant to external corrosion and pitting; will not rust.

TA30 · Electrical

Electrical conductivityNonconductive
Electrical propertyNonconductive.

TA30 · Fire

Fire performanceWill not sustain ignition after the external flame source is removed; flash ignition temperature is 850°F.

TA30 · Chemical

Chemical resistanceResistant to acids, alkalis, and salt solutions.

5140110 · Application

Transition applicationSpigot-end PVC conduit to a threaded metal or PVC plastic female bell end

TA30 · Operating Conditions

NEC ambient-temperature limitNEC use of RNC and fittings is allowed where ambient temperature does not exceed 122°F.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.