Skip to content
Contractor Lighting & Supply

CLS Wet-Location LED Exit Sign/Emergency Light Combo, Single-Face, Red/White, Remote-Capable, Cold-Weather

0 Reviews
SKU
EXIT-COMBO-WR-RC-WET

This wet-location LED exit and emergency-light combo pairs an exit sign with adjustable LED lamp heads and a 7.2 W remote-lamp capacity. It accepts selectable 120/277 VAC input and uses a 6 V rechargeable NiCd battery with an internal heater and battery blanket; the stated operating range is -20°C to 50°C, and emergency illumination is specified for at least 90 minutes.

  • Dual 120/277 VAC Input
  • Minimum 90-Minute Emergency Illumination
  • 7.2 W Remote Lamp Capacity
  • Cold-Weather Heater and Battery Blanket
  • Corrosion-Resistant Enclosure
  • 6 V Rechargeable NiCd Battery

Product Overview

This wet-location LED exit and emergency-light combo pairs an exit sign with adjustable LED lamp heads and a 7.2 W remote-lamp capacity. It accepts selectable 120/277 VAC input and uses a 6 V rechargeable NiCd battery with an internal heater and battery blanket; the stated operating range is -20°C to 50°C, and emergency illumination is specified for at least 90 minutes.

Technical Specifications

Product information and specifications for the selected item.

SKU: EXIT-COMBO-WR-RC-WET

Product Information

BrandContractor Lighting & Supply
SKUEXIT-COMBO-WR-RC-WET
CategoryEmergency Lights & Exit Signs

Key Specs

One-Sided/Two-SidedOne-sided
Damp/Wet RatingWet Rated (Uncovered Outdoor)
Letter ColorRed
Width (in.)12.375

Sign Format

One-Sided/Two-SidedOne-sided
Letter ColorRed

Ratings & Use

Damp/Wet RatingWet Rated (Uncovered Outdoor)
Pre-test battery charge period2 hours
Remote lamp capacity7.2 W
Remote connectionA connection labeled “TO REMOTE” is shown
Operating temperature range-20 to 50 °C
Battery voltage6 V
Conduit connection requirementUse UL-listed conduit parts suitable for wet locations
Cold-weather componentsInternal heater and battery blanket
Test methodMagnetic test switch operated with a supplied magnet
Functional test scheduleEvery 30 days for at least 30 seconds; annually for 90 minutes
Input power and current120 V: 35 W, 0.300 A; 277 V: 148.5 W, 0.540 A
Cold-weather operating range-20 to 50 °C
Selectable input voltage120 or 277 VAC
Expected battery life5 years at normal ambient temperature of 72°F
Magnetic test responseIndicator turns off; LED board stays on and lampheads turn on
Recharge time for a discharged battery24 h
Mounting optionsWall, ceiling, or end mount
UL listingUL listed
AC input wire colors120 V: black and white; 277 V: red and white
Conduit entry3/4-in. hole on top or side of the frame
Emergency illumination durationAt least 90 min
Heating pad connectionA heating-pad connector is shown with the battery assembly
Conduit typeFlexible conduit only

Finish

Color/Finish FamilyWhite
Mounting plate materialSteel
Housing construction5VA flame-retardant polycarbonate

Dimensions & Weight

Height (in.)13.6875
Width (in.)12.375
Length (in.)5.9375
Weight (lb.)5

Product Documents

  • Warranty and Obligations — Contractor Lighting & Supply, Inc. Warranty Open / download file
  • Installation Instructions for Compact Wet Location Combo Exit / Emergency Light Installation manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.