Skip to content
Unknown

Copper Split-Bolt Connector, 2 Conductors

0 Reviews
SKU
SK-250 CU

Copper split-bolt connector, 2 conductorsAdditional specifications Additional specifications · Compatibility Aluminum conductor use Consult factory Copper conductor constructions Solid, compact, compressed and concentric copper conductors Conductor pairings Copper-to-copper, Copperweld-to-Copperweld, or copper-to-Copperweld Maximum Copperweld con...

Needs Data

Copper split-bolt connector, 2 conductorsAdditional specifications Additional specifications · Compatibility Aluminum conductor use Consult factory Copper conductor constructions Solid, compact, compressed and concentric copper conductors Conductor pairings Copper-to-copper, Copperweld-to-Copperweld, or copper-to-Copperweld Maximum Copperweld con...

Product Overview

Copper split-bolt connector, 2 conductors

Additional specifications

Additional specifications · Compatibility

Aluminum conductor use Consult factory
Copper conductor constructions Solid, compact, compressed and concentric copper conductors
Conductor pairings Copper-to-copper, Copperweld-to-Copperweld, or copper-to-Copperweld
Maximum Copperweld conductor 7 No. 5 stranded

Additional specifications · Operating Conditions

Temperature rating 90 °C

Additional specifications · Installation

Conductor surface preparation Clean conductor with a wire brush or abrasive cloth, then apply anti-oxidant to stripped ends and force it into the strands
High-voltage installation requirement Proper high-voltage spacing and insulation techniques must be used
Tap connection procedure Remove the nut/pressure bar and spacer, position over the main wire, reinstall the spacer and hardware, then insert the tap to full clamp contact
Splice connection procedure Insert wires through opposite sides to full clamp contact; hand-tighten the nut, then torque to the chart value
Stripping timing For insulated 90°C-maximum-rated wire in NEC applications, strip immediately before installation
Main drive size 1-5/16
Recommended torque 650 in-lb
Main drive type External hex
Spacer placement Always clamp the spacer between the two wires, with its radius side facing the nut/pressure bar
Insulation stripping Strip enough insulation for proper clamping contact; avoid overlap and strand nicks

Additional specifications · Electrical

Dual rated No
Voltage rating 35 kV

Additional specifications · Construction

Material High-strength copper alloy

Additional specifications · Material & Finish

Plated components Bolt, nut, spacer and pressure bar are electro-tin plated

Additional specifications · Safety

Torque warning Failure to achieve proper torque can overheat the connector and wire

Additional specifications · Compliance

NEMA code S-588-4
UL listing UL 486A/B Listed
CSA standard C22.2 No. 65

Additional specifications · Application

Direct burial No

Technical Specifications

Product information and specifications for the selected item.

SKU: SK-250 CU

Product Information

BrandUnknown
MPNSK-250 CU
SKUSK-250 CU
CategoryTerminals, Splices & Connectors

Key Specs

Wire Connector TypeClamp
Minimum Wire Gauge4
Color FamilySilver
Length (in.)2.33

Connector & Wire

Wire Connector TypeClamp
Minimum Wire Gauge4
Aluminum conductor useConsult factory
Temperature rating90 °C
Conductor surface preparationClean conductor with a wire brush or abrasive cloth, then apply anti-oxidant to stripped ends and force it into the strands
High-voltage installation requirementProper high-voltage spacing and insulation techniques must be used
Tap connection procedureRemove the nut/pressure bar and spacer, position over the main wire, reinstall the spacer and hardware, then insert the tap to full clamp contact
Splice connection procedureInsert wires through opposite sides to full clamp contact; hand-tighten the nut, then torque to the chart value
Stripping timingFor insulated 90°C-maximum-rated wire in NEC applications, strip immediately before installation
Copper conductor constructionsSolid, compact, compressed and concentric copper conductors
Dual ratedNo
Conductor pairingsCopper-to-copper, Copperweld-to-Copperweld, or copper-to-Copperweld
Main drive size1-5/16
Voltage rating35 kV
Recommended torque650 in-lb
Torque warningFailure to achieve proper torque can overheat the connector and wire
NEMA codeS-588-4
Direct burialNo
Main drive typeExternal hex
UL listingUL 486A/B Listed
Maximum Copperweld conductor7 No. 5 stranded
CSA standardC22.2 No. 65
Spacer placementAlways clamp the spacer between the two wires, with its radius side facing the nut/pressure bar
Insulation strippingStrip enough insulation for proper clamping contact; avoid overlap and strand nicks

Color & Finish

Color FamilySilver
MaterialHigh-strength copper alloy
Plated componentsBolt, nut, spacer and pressure bar are electro-tin plated

Dimensions & Weight

Height (in.)1.31
Width (in.)1.52
Length (in.)2.33
Weight (lb.)0.435

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.