Skip to content
DEWALT

DEWALT Pure110+ Epoxy Injection Adhesive, 20.5 fl oz Dual Cartridge

0 Reviews
SKU
PURE110

DEWALT Pure110+ is a two-component, 1:1 epoxy injection adhesive in a 20.5 fl oz dual cartridge, specified for anchoring threaded rod and rebar in concrete.

  • 20.5 fl oz dual cartridge
  • Two-component 1:1 epoxy
  • Threaded-rod and rebar anchoring
  • Anchor element size range
  • Concrete and masonry substrates
  • Mixing nozzle included

Product Overview

DEWALT Pure110+ is a two-component, 1:1 epoxy injection adhesive in a 20.5 fl oz dual cartridge, specified for anchoring threaded rod and rebar in concrete.

Technical Specifications

Product information and specifications for the selected item.

SKU: PURE110

Product Information

BrandDEWALT
MPNPURE110
SKUPURE110
CategoryTape, Sealants & Consumables

Key Specs

Color FamilyRed
Length (in.)2.4
Width (in.)5

Tape & Appearance

Color FamilyRed
Compatible base materialsNormal-weight and lightweight concrete, grouted concrete masonry, and hollow concrete masonry; hollow-masonry installations use a screen tube.
Concrete compressive-strength rangeSpecified concrete f′c: 2,500–8,500 psi (17.2–58.6 MPa); design calculations limited to 8,000 psi (55.2 MPa). psi (MPa)
Cracking and loading conditionsFor cracked and uncracked concrete; wind and seismic loading in SDC A–F.
Gel time and full cure at 68°FAt a 68°F (20°C) base-material temperature: 25-minute gel time and 8-hour full cure. min / h
Regional code supplements2023 Los Angeles Building/Residential Code and Florida Building/Residential Code supplements.
Adhesive chemistryTwo-component injectable epoxy
Building-code evaluationICC-ES ESR-3298 evaluation for the 2024, 2021, 2018, and 2015 IBC and IRC.
Permissible installation conditionsDry concrete, water-saturated concrete, water-filled holes, and underwater/submerged concrete.
Bond-strength service-temperature dataBond-strength design data include 110°F (43°C) long-term service and 140°F (60°C) or 176°F (80°C) short-term service conditions, depending on the listed temperature category. °F (°C)
Adhesive standard conformanceASTM C881/AASHTO M235: Types I, II, IV and V, Grade 3, Class B; Types I and IV, Grade 3, Class C.
Overhead installation requirementsOverhead and upwardly inclined installations require piston plugs and extension tubing; support the anchor or rebar until fully cured.
Lead classificationClassified as lead-free in accordance with NSF/ANSI/CAN 372.
Shelf life and storage conditionsDual-cartridge shelf life: 2 years; store in a dry, dark environment at 41–86°F (5–30°C).
Standard hole-cleaning procedureStandard dry/wet-hole cleaning: blow twice, brush twice, then blow twice; compressed air nozzle minimum 90 psi.
Cartridge temperature in use50–110°F (10–43°C) in use; for overhead applications, 50–90°F (10–32°C). °F (°C)
Canadian code listingCSA A23.3-14 Annex D, as referenced by the 2015 National Building Code of Canada, Division B, Part 4, Section 4.3.3.
Mix ratio1:1
Drinking-water-system complianceComplies with NSF/ANSI/CAN 61 health-effects requirements for drinking-water system components; certified for water distribution systems.
Concrete temperature during installationConcrete temperature during installation: 41–104°F (5–40°C). °F (°C)
VOC complianceCompliant with California DPH VOC-emissions and South Coast AQMD VOC-content requirements (LEED v4.1).

Dimensions & Weight

Height (in.)10.1
Width (in.)5
Length (in.)2.4
Weight (lb.)2.55
Compatible anchor element sizesThreaded rods: 3/8 to 1-1/4 in diameter; rebar: No. 3 to No. 11.
Core-drilled hole compatibilitySupplemental bond data cover threaded rods and rebar in diamond-core-drilled concrete holes; the diamond core bit nominal size matches the corresponding carbide bit size.
Post-installed rebar applicationsRebar development-length and lap-splice connections up to 60 bar diameters (60d) embedment.
NSF 61 water-treatment surface-area ratioMaximum exposed surface-area-to-volume ratio: 216 in² per 1,000 gallons (3,785 L) for water-treatment applications. in²/1,000 gal

Product Documents

  • Pure110+® VOC Emissions Test Report (CDPH) Certification compliance Open / download file
  • Pure110+® LEED VOC Compliance Report Certification compliance Open / download file
  • ESR-3298 LABC/LARC Supplement — Pure110+® Certification compliance Open / download file
  • ICC-ES ELC-3298 — Pure110+® Epoxy Adhesive Anchor System in Cracked and Uncracked Concrete Certification compliance Open / download file
  • ICC-ES Evaluation Report ESR-3298 — Pure110+® Epoxy Adhesive Anchor System and Post-Installed Reinforcing Bar Connections Certification compliance Open / download file
  • PURE 110+ Safety Data Sheet (Components A and B) Safety sheet Open / download file
  • Pure110+® Technical Bulletin — Supplemental Installation Instructions for Core-Drilled Holes Installation manual Open / download file
  • Pure110+® Epoxy Injection Adhesive Anchoring System and Post-Installed Reinforcing Bar Connections — Technical Guide Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.