Skip to content

Eaton 1MM320R 3-Socket Ring-Style Residential Meter Stack

0 Reviews
SKU
1MM320R

The Eaton 1MM320R is a residential three-socket ring-style meter stack with a 200 A socket rating and 800 A bus rating. It is rated for single-phase 120/240 V AC and has a NEMA 3R enclosure for outdoor use.

  • Three ring-style meter sockets
  • 200 A socket rating
  • 800 A bus rating
  • Single-phase 120/240 V AC
  • Outdoor NEMA 3R enclosure
  • UL Listed

Product Overview

The Eaton 1MM320R is a residential three-socket ring-style meter stack with a 200 A socket rating and 800 A bus rating. It is rated for single-phase 120/240 V AC and has a NEMA 3R enclosure for outdoor use.

Technical Specifications

Product information and specifications for the selected item.

SKU: 1MM320R

Product Information

BrandEaton
MPN1MM320R
SKU1MM320R
UPC / GTIN786849051945
CategoryMeter Stacks

Key Specs

Meter Stack Amperage Rating (A)200 A
Conductor Size14 to 2/0 AWG, 1/0 AWG to 300 kcmil Al/Cu
NEMA Enclosure RatingNEMA 3R
Phase1
Voltage Rating120/240 V AC
Type3-Socket Multiple Metering

Electrical Ratings

Meter Stack Amperage Rating (A)200 A
Voltage Rating120/240 V AC
Phase1
Interrupt ratingDepends on selected main circuit breaker
Tenant circuit breaker selectionUse only breakers listed on the meter module; check amperage and interrupting capacity for the application
Maximum short-circuit rating (conditional)Up to 100,000; dependent on the AIC ratings of installed main tenant circuit breakers and the main device. A rms symmetrical
Utility approvals (examples)Examples: AL—Alabama Power; DC—Atlantic City Electric / Delmarva (Connectiv) and PEPCO; NC—Dominion; CA—Southern California Edison and Pacific Gas and Electric (PG&E); HI—Hawaiian Electric
CertificationUL Listed

Stack Configuration

Conductor Size14 to 2/0 AWG, 1/0 AWG to 300 kcmil Al/Cu
Type3-Socket Multiple Metering
Fifth jawNot included
Module assembly methodHang modules on mounting rails; loosen the main bus joint bolts and slide modules together
Neutral and ground barsNeutral and ground bars are included in each stack.
Main bus joint bolt torque300 (33.90) lb-in (N-m)
Mounting feetTwo per meter module
Main service-module connectionMechanically and electrically built to bolt up with main service modules and commercial modular metering stacks.
Meter socket base mountingInstalled without fasteners.
Main/tenant breaker typeBolt-on type

Enclosure & Material

NEMA Enclosure RatingNEMA 3R
MaterialGalvanized Steel
Outdoor enclosure finishRust-inhibiting phosphate primer and gray baked enamel are standard.
Top-entry hub requirementFor outdoor top-entry applications, mount Myer-type hubs on the rainproof cap.
Ring-style cover attachmentTwo screws inside the socket rim
Rain-tight capShipped on each outdoor meter module.
Module bonding fasteners and torqueTwo 1/4-20 screws supplied per module; tighten to 26 lb-in (2.94 N-m) to bond enclosures
Outdoor top-entry provisionsTop-endwall knockouts are not provided; punch holes as needed and install raintight hubs for outdoor use
Main tenant feeder exit optionsMain tenant feeders can exit at the bottom or back; knockouts are available at all exit locations.
Bottom-entry knockout provisionBottom knockouts are provided for indoor and outdoor connections
Equipment ground-bar positionFactory-installed in the side gutter; movable to the top or bottom gutter.

Dimensions & Weight

Height (in.)52.35
Width (in.)13.5
Length (in.)7.01
Weight (lb.)66
Rail mounting-hole offset (X) from module bottom line34-7/32 (869.16) in. (mm)
Bottom socket line to module bottom offset (Z)18-15/32 (469.11) in. (mm)

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.