Skip to content

Eaton B-Line KwikWire Clamp for 1/16" and 3/32" Wire Rope

0 Reviews
SKU
BKC100

The Eaton B-Line KwikWire BKC100 is a clamp for 1/16-in and 3/32-in wire rope. Its vertical hanging working-load ranges are 0–75 lb and 25–150 lb, respectively, with a safety factor of 4; beam wrapping requires no drilling, and guaranteed ratings require B-Line series wire rope.

  • Fits 1/16- and 3/32-in Wire Rope
  • Vertical Working-Load Ratings
  • B-Line Rope Required for Guaranteed Ratings
  • cULus Listed
  • Beam Wrapping Without Drilling
  • Tool-Free Wire-Rope Installation

Product Overview

The Eaton B-Line KwikWire BKC100 is a clamp for 1/16-in and 3/32-in wire rope. Its vertical hanging working-load ranges are 0–75 lb and 25–150 lb, respectively, with a safety factor of 4; beam wrapping requires no drilling, and guaranteed ratings require B-Line series wire rope.

Technical Specifications

Product information and specifications for the selected item.

SKU: BKC100

Product Information

BrandEaton
MPNBKC100
SKUBKC100
UPC / GTIN782051546972
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Hanging Mount
Length (in.)1.26
Width (in.)0.82

Support & Fit

Pipe Hangers & Supports TypePipe Hanging Mount
Atmosphere restrictionDo not use in chlorinated or caustic atmospheres.
Working load with 1/16-in wire rope0-75 lb
Load-rating qualificationClamp load ratings are guaranteed only when used with the supplied wire rope.
Compatible wire rope diameters1/16 and 3/32 in
Wire-rope tail before tensioning2 to 3 in
Beam applicationCan be quickly installed around beams.
Coated wire-rope restrictionDo not use the clamp on coated wire rope.
Lubrication restrictionDo not apply lubricant.
Angled-suspension load factors15°: 96%; 30°: 86%; 45°: 70%; 60°: 50% of chart load
Lifting restrictionDo not use for overhead lifting or hoisting.
Working-load safety factor4
ListingcULus Listed
Wire-rope routingPass rope through the clamp, loop it through or around the support, then pass it back through the clamp.
Location conditionFor use in dry locations.
Working load with 3/32-in wire rope25-150 lb
Tool requirementNo tools are required to install the wire rope in the clamp.
Adjustment toolingNo tools required for adjustment.
Wire-release adjustment methodRemove tension, pull the wire slightly to disengage the teeth, then slide the adjustment pin to release it.
Required wire ropeB-Line series wire rope is required for guaranteed clamp load ratings.
Cable and component conditionDo not use visibly distorted or worn cable or components; remove damaged cable end before insertion.
Drilling requirementNo drilling required for beam wrapping.
Cable coating restrictionDo not paint cable near the clamp's working area.
Wire-rope adjustmentRemove tension, pull the rope slightly to disengage the teeth, then slide the adjustment pin to release the rope.
Working-load orientationCharted working loads are for vertical hanging.

Dimensions & Weight

Height (in.)0.39
Width (in.)0.82
Length (in.)1.26

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.