Skip to content
Eaton Bussmann Series

Eaton Bussmann Fusetron FRN-R-25 25A Class RK5 Time-Delay Fuse

0 Reviews
SKU
S1-FRNR25

The Eaton Bussmann Fusetron FRN-R-25 is a 25 A Class RK5, dual-element time-delay, current-limiting fuse rated 250 V AC and 125 V DC. It has ferrule ends and a non-indicating design.

  • 25 A Fuse Rating
  • Class RK5 Fuse
  • 250 V AC / 125 V DC Ratings
  • Dual-Element Time Delay
  • 200 kA AC Interrupting Rating
  • Ferrule-End Connections

The Eaton Bussmann Fusetron FRN-R-25 is a 25 A Class RK5, dual-element time-delay, current-limiting fuse rated 250 V AC and 125 V DC. It has ferrule ends and a non-indicating design.

Product Overview

The Eaton Bussmann Fusetron FRN-R-25 is a 25 A Class RK5, dual-element time-delay, current-limiting fuse rated 250 V AC and 125 V DC. It has ferrule ends and a non-indicating design.

  • 25 A Fuse Rating
  • Class RK5 Fuse
  • 250 V AC / 125 V DC Ratings
  • Dual-Element Time Delay
  • 200 kA AC Interrupting Rating
  • Ferrule-End Connections

Technical Specifications

Product information and specifications for the selected item.

SKU: S1-FRNR25

Product Information

BrandEaton Bussmann Series
MPNS1-FRNR25
SKUS1-FRNR25
CategoryFuses, Fuse Blocks & Holders

Key Specs

Current - Maximum25 A
AC Voltage Rating250 V AC
DC Voltage Rating125 V DC
Fits Fuse Class or TypeClass RK5

Electrical Ratings

Current - Maximum25 A
AC Voltage Rating250 V AC
DC Voltage Rating125 V DC
AC interrupting rating200 kA RMS symmetrical
Minimum time-delay at 500% rated current8 seconds
DC interrupting rating20 kA
Selective coordination amp ratio2:1
Response time8 sec at 500%
Motor FLA sizing guidanceAs close as 125% of motor FLA
Interrupting rating200 at 250 Vac; 20 at 125 Vdc kAIC
Overload element responseProtection against low level overcurrent of overloads

Fuse Type & Indication

Fits Fuse Class or TypeClass RK5
Visual IndicationNon-Indicating
Typical applicationsPower panelboards Motor control centers Combination starters Machinery disconnects
Protection functionsMotor overload, ground fault and short-circuit protection
ConnectionFerrule end x ferrule end
cULus listingcULus Listed file No. JDDZ.E4273
CE markingCE
Single-phasing protectionHelps protect motors against burnout from single-phasing on three-phase systems
Circuit suitabilityCircuits subject to temporary motor overloads and surge currents
Number of elementsDual
Fuse designDual-element, current-limiting
Current-limiting designYes
Agency listing and standardscULus Listed (file JDDZ.E4273); UL 248-12; CSA C22.2 No. 248.12
CSA standardC22.2 No. 248.12

Dimensions & Weight

Height (in.)0.5
Width (in.)0.5
Length (in.)2

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.