Skip to content

Eaton DG321UGB 30A 3-Pole 240V General-Duty Non-Fusible Safety Switch, NEMA 1

0 Reviews
SKU
GNF321

The supplied listing describes Eaton GNF321 as a 30 A, three-pole, 240 V non-fusible indoor safety switch. Its listed motor ratings are 3 hp single-phase and 7.5 hp three-phase at 240 Vac, and its load make/break rating is 100%.

  • 30 A, 3-Pole, 240 V
  • Non-Fusible Indoor Safety Switch
  • 100% Load Make/Break Rating
  • 240 Vac Motor Ratings
  • 10 kA RMS Symmetrical Short-Circuit Rating
  • #14–#6 AWG Terminals

Product Overview

The supplied listing describes Eaton GNF321 as a 30 A, three-pole, 240 V non-fusible indoor safety switch. Its listed motor ratings are 3 hp single-phase and 7.5 hp three-phase at 240 Vac, and its load make/break rating is 100%.

Technical Specifications

Product information and specifications for the selected item.

SKU: GNF321

Product Information

BrandEaton
SKUGNF321
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)30
Phase Type3 Phase
Disconnect TypeSafety Switch
NEMA Enclosure RatingNEMA 1

Switch Ratings

Maximum Amperage (A)30
Phase Type3 Phase
Load make/break rating100% load make and load break rated; non-fusible switches are 100% fully rated.
Motor horsepower ratings3 hp single-phase; 7.5 hp three-phase at 240 Vac.
Short-circuit rating with upstream protection10,000 A rms symmetrical with a Class H/K fuse or any circuit breaker; higher combination ratings require the listed upstream device, whose rating must not exceed the switch rating.

Disconnect Configuration

Disconnect TypeSafety Switch
FusedNon-Fused
Wire count3 wires
Switching actionSingle-throw
Standard terminal wire sizeMinimum #14 AWG to maximum #6 AWG; copper or aluminum conductors
Ground lugFactory-installed ground lug; accepts #14–#4 AWG copper/aluminum conductors.
Terminal conductor range#14–#6 AWG copper or aluminum conductors.

Enclosure & Certifications

NEMA Enclosure RatingNEMA 1
Certifications and ListingsUL Listed
Barrier code complianceNEC 230.62(C) compliant barrier
Enclosure materialPainted steel
Service-entrance limitationNot approved for service entrance unless a neutral kit is installed.

Dimensions & Weight

Height (in.)10.69
Width (in.)6.38
Length (in.)6.88
Weight (lb.)6

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.