Skip to content

Eaton Tamper-Resistant Self-Test GFCI Duplex Receptacle, Black

0 Reviews
SKU
TRSGF15BK

Eaton TRSGF15BK is a black polycarbonate, tamper-resistant self-test GFCI duplex receptacle specified at 15 A and 125 V, with a NEMA 5-15R configuration, an indicator light, and back- and side-wire screw-terminal connections.

  • 15 A, 125 V Rating
  • GFCI Duplex Receptacle
  • Tamper-Resistant Outlets
  • Self-Test With Indicator Light
  • NEMA 5-15R Configuration
  • Back- and Side-Wire Connections

Eaton TRSGF15BK is a black polycarbonate, tamper-resistant self-test GFCI duplex receptacle specified at 15 A and 125 V, with a NEMA 5-15R configuration, an indicator light, and back- and side-wire screw-terminal connections.

Product Overview

Eaton TRSGF15BK is a black polycarbonate, tamper-resistant self-test GFCI duplex receptacle specified at 15 A and 125 V, with a NEMA 5-15R configuration, an indicator light, and back- and side-wire screw-terminal connections.

  • 15 A, 125 V Rating
  • GFCI Duplex Receptacle
  • Tamper-Resistant Outlets
  • Self-Test With Indicator Light
  • NEMA 5-15R Configuration
  • Back- and Side-Wire Connections

Technical Specifications

Product information and specifications for the selected item.

SKU: TRSGF15BK

Product Information

BrandEaton
MPNTRSGF15BK
SKUTRSGF15BK
UPC / GTIN032664739866
CategoryReceptacles & Outlets

Key Specs

Amperage (A)15
Voltage (V)125 V
NEMA ConfigurationNEMA 5-15R
Safety RatingGFCI, Grounded
Wire Connection TypeScrew Terminal

Electrical Ratings

Amperage (A)15
Voltage (V)125 V
Frequency60 Hz
Short-circuit test levelMeets and exceeds 10 kA
Maximum interrupting capacity20 A
Overload temperature riseMax. 30ºC (86°F) after 100 cycles of overload @ 150% of rated current (DC)
Load-side feed-through rating20 A
Dielectric withstand2000 V

Configuration & Wiring

NEMA ConfigurationNEMA 5-15R
Wire Connection TypeScrew Terminal
Supported conductor typesSolid or stranded wire up to #10 AWG
Ground termination constructionBack-wire clamp
Backwire strip length11/16 in
Terminal and mounting screw headTri-combo head
Automatic grounding systemEliminates the bonding-jumper need in grounded metal enclosures and provides redundant ground continuity where a jumper is used
Mounting methodFlush
Terminal torque16 lbf-inch
Sidewire strip length7/8 in
Allowable wire size#14 - 10 AWG
Terminal screw size#8-32
Compatible conductor materialCopper or copper-clad wire only; not aluminum

Safety & Compatibility

Safety RatingGFCI, Grounded
Flammability classificationMeets UL 94 requirements; V2 rated
Self-test failure responseIf ground-fault protection is not detected, the device trips, will not reset, and the status indicator glows amber
Operating temperature range-35ÂşC to 66ÂşC (-31ÂşF to 150.8ÂşF)
Applicable standardsUL 943 (GFCI), UL 498 (receptacles), and applicable CSA requirements
Line-load miswiring protectionDoes not provide power downstream when wired incorrectly
GFCI trip time0.025 (Class A) seconds
NEC compliance2017 and 2020 NEC Article 406.12

Features & Finish

FeaturesIndicator Light, Tamper Resistant
Wall Plate IncludedWith Wall Plate
Color FamilyBlack
MaterialPolycarbonate
Bundle/SingleSingle Product

Dimensions & Weight

Height (in.)4.625
Width (in.)2
Length (in.)2.813
Weight (lb.)0.39

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.