Skip to content
Elite Lighting

Elite Lighting 6ft Single-Circuit Track, Architectural Black

0 Reviews
SKU
ET6-ABK

The Elite Lighting ET6-ABK is a 6 ft single-circuit track with an architectural black extruded aluminum body. It has insulated 12 AWG solid copper conductors, a 2400 W maximum track load, and compatibility with most 3-wire systems; overall dimensions are 1-3/8 in W Ă— 5/8 in H Ă— 72 in L, and an end cap and mounting anchors are included.

  • Single-Circuit Track
  • 72-Inch Track Length
  • 2400 W Maximum Load
  • 12 AWG Solid Copper Conductors
  • Most 3-Wire System Compatibility
  • End Cap and Anchors Included

The Elite Lighting ET6-ABK is a 6 ft single-circuit track with an architectural black extruded aluminum body. It has insulated 12 AWG solid copper conductors, a 2400 W maximum track load, and compatibility with most 3-wire systems; overall dimensions are 1-3/8 in W Ă— 5/8 in H Ă— 72 in L, and an end cap and mounting anchors are included.

Product Overview

The Elite Lighting ET6-ABK is a 6 ft single-circuit track with an architectural black extruded aluminum body. It has insulated 12 AWG solid copper conductors, a 2400 W maximum track load, and compatibility with most 3-wire systems; overall dimensions are 1-3/8 in W Ă— 5/8 in H Ă— 72 in L, and an end cap and mounting anchors are included.

  • Single-Circuit Track
  • 72-Inch Track Length
  • 2400 W Maximum Load
  • 12 AWG Solid Copper Conductors
  • Most 3-Wire System Compatibility
  • End Cap and Anchors Included

Technical Specifications

Product information and specifications for the selected item.

SKU: ET6-ABK

Product Information

BrandElite Lighting
MPNET6-ABK
SKUET6-ABK
UPC / GTIN848070046517
CategoryFixture Mounting & Accessories

Key Specs

Overall Width/Diameter (Inch)1.375
Overall Width/Diameter (mm)34.93
MaterialAluminum

Accessory & Fit

Additional mounting-hole guidance5/32-in holes through the track centerline, at least 6 in from track ends
Bus-wire trim after field cutTrim 1/4 in from the bus-wire end after flush cutting
Field-cut methodFlush-cut with a fine-toothed hacksaw; file rough edges or flash and brush out filings
Maximum support-point spacingNot more than 4 ft
Ceiling hole size for toggle-wing mounting1/2 in
ET6 mounting-support intervals6 / 30 / 30 / 6 in
Power-connector orientationPower connectors fit only one way
Optional additional track holes5/32-in. holes through the track centerline, at least 6 in. from track ends
Mounting configurationSurface-mount track system

Features & Standards

IncludesEnd Cap, Mounting Anchors
StandardsUL
Outdoor useNot for outdoor use
Maximum track load2400 W
Power isolationDisconnect AC power before installation or servicing
Polarity markerVisual polarity groove
Conductor gauge12 gauge

Material & Finish

MaterialAluminum
ColorBlack

Dimensions & Weight

Overall Width/Diameter (mm)34.93
Overall Width/Diameter (Inch)1.375
Height (in.)0.625
Width (in.)1.375
Length (in.)72

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.