Skip to content
Elite Lighting

Elite Lighting 8 ft Single-Circuit Track, Architectural Black

0 Reviews
SKU
ET8-ABK

The Elite Lighting ET8-ABK is an 8 ft single-circuit track with an architectural black extruded-aluminum body. It has insulated solid 12-gauge copper conductors, a visual polarity groove, a 2400 W maximum rating, and listed compatibility with most 3-wire systems.

  • 8 ft single-circuit track
  • Compatible with most 3-wire systems
  • 2400 W maximum rating
  • Insulated solid 12-gauge copper conductors
  • 1.375 in. Ă— 0.625 in. profile
  • End cap and mounting anchors included

Product Overview

The Elite Lighting ET8-ABK is an 8 ft single-circuit track with an architectural black extruded-aluminum body. It has insulated solid 12-gauge copper conductors, a visual polarity groove, a 2400 W maximum rating, and listed compatibility with most 3-wire systems.

Technical Specifications

Product information and specifications for the selected item.

SKU: ET8-ABK

Product Information

BrandElite Lighting
MPNET8-ABK
SKUET8-ABK
UPC / GTIN848070046524
CategoryFixture Mounting & Accessories

Key Specs

Overall Width/Diameter (Inch)1.375
Overall Width/Diameter (mm)34.925
MaterialAluminum

Accessory & Fit

Field-cut bus-wire handlingDo not let bus wires or insulation protrude; do not cut the wires and push insulation back into the track
Field-cutting methodFlush cut with a fine-toothed hacksaw
Field-cut methodFlush-cut with a fine-toothed hacksaw; file rough edges or flash and brush out filings
Bus-wire trim after field cuttingTrim 1/4 from the copper bus-wire end after the flush cut in
Power-connector orientationPower connectors fit only one way; the right-hand connector fits the factory-shipped open end

Features & Standards

IncludesEnd Cap, Mounting Anchors
Power isolationDisconnect AC power before installation and servicing
Maximum power rating2400 W
Fixture-head repositioningRelocatable fixture head
Outdoor useNot for outdoor use
Polarity indicationVisual polarity groove

Material & Finish

MaterialAluminum
ColorBlack
Conductor constructionInsulated, solid 12-gauge copper

Dimensions & Weight

Overall Width/Diameter (mm)34.925
Overall Width/Diameter (Inch)1.375
Height (in.)0.625
Width (in.)1.375
Length (in.)96
ET8 mounting support-point layoutEnd offsets 4-3/4; between-support spacings 28-1/2, 29-3/8, and 28-1/2
Additional track-hole requirementsDrill 5/32 holes through the track centerline, at least 6 from the track ends
Maximum support spacingNot more than 4 ft
Ceiling-hole size for toggle-wing mounting1/2 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.