Skip to content
Elite Lighting

Elite Lighting ET6 6-Foot Single-Circuit Track

0 Reviews
SKU
ET6-W

Elite Lighting ET6-W is a 6-foot, single-circuit aluminum track rail specified in white, with a 1.375-inch overall width and a 2,400 W maximum track load. An end cap and mounting anchors are included, and fixture heads on the track are relocatable.

  • 6-Foot Track Length
  • Single-Circuit Track
  • 2,400 W Maximum Track Load
  • 1.375-Inch Overall Width
  • White Aluminum Rail
  • End Cap and Mounting Anchors Included

Elite Lighting ET6-W is a 6-foot, single-circuit aluminum track rail specified in white, with a 1.375-inch overall width and a 2,400 W maximum track load. An end cap and mounting anchors are included, and fixture heads on the track are relocatable.

Product Overview

Elite Lighting ET6-W is a 6-foot, single-circuit aluminum track rail specified in white, with a 1.375-inch overall width and a 2,400 W maximum track load. An end cap and mounting anchors are included, and fixture heads on the track are relocatable.

  • 6-Foot Track Length
  • Single-Circuit Track
  • 2,400 W Maximum Track Load
  • 1.375-Inch Overall Width
  • White Aluminum Rail
  • End Cap and Mounting Anchors Included

Technical Specifications

Product information and specifications for the selected item.

SKU: ET6-W

Product Information

BrandElite Lighting
MPNET6-W
SKUET6-W
CategoryFixture Mounting & Accessories

Key Specs

Overall Width/Diameter (Inch)1.375
Overall Width/Diameter (mm)34.925
MaterialAluminum

Features & Standards

IncludesEnd Cap, Mounting Anchors
Polarity indicatorVisual polarity groove
Outdoor useNot for outdoor use
Fixture-head repositioningRelocatable fixture head
Field-cut methodFlush cut with a fine-toothed hacksaw; file rough edges and remove filings
Maximum power rating2400 W
Maximum track load2400 W
Bus-wire trim after field cutTrim 1/4 in from the bus-wire end after the flush cut
Power-connector orientationPower connectors fit only one way
Conductor gauge and constructionSolid, insulated 12-gauge
Bus-wire trim after field cutting1/4 in
Fixture-head positioningRelocatable

Material & Finish

MaterialAluminum
ColorWhite

Dimensions & Weight

Overall Width/Diameter (mm)34.925
Overall Width/Diameter (Inch)1.375
Surface-mount support spacingNot more than 4 ft
Additional mounting-hole placement5/32-in holes on the track centerline, at least 6 in from track ends
Maximum support-point spacing4 ft
Toggle-wing mounting-hole diameter1/2 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.