Skip to content
Elite Lighting

Elite Lighting ET8-AWH 8-ft Single-Circuit Track, Architectural White

0 Reviews
SKU
ET8-AWH

Elite Lighting ET8-AWH is an 8-ft, single-circuit track in architectural white, with an extruded aluminum body and insulated solid 12-gauge copper conductors. It is compatible with relocatable track heads and most 3-wire systems, with a maximum track load of 2400 W.

  • 8-ft Single-Circuit Track
  • Track-Head and 3-Wire Compatibility
  • 2400 W Maximum Track Load
  • Insulated 12-Gauge Copper Conductors
  • Extruded Aluminum Body
  • Architectural White Color

Product Overview

Elite Lighting ET8-AWH is an 8-ft, single-circuit track in architectural white, with an extruded aluminum body and insulated solid 12-gauge copper conductors. It is compatible with relocatable track heads and most 3-wire systems, with a maximum track load of 2400 W.

Technical Specifications

Product information and specifications for the selected item.

SKU: ET8-AWH

Product Information

BrandElite Lighting
MPNET8-AWH
SKUET8-AWH
UPC / GTIN848070046050
CategoryFixture Mounting & Accessories

Key Specs

Overall Width/Diameter (Inch)1.375
Overall Width/Diameter (mm)34.925
MaterialAluminum

Accessory & Fit

Fixture-head positioningRelocatable fixture head

Features & Standards

IncludesEnd Cap, Mounting Anchors
StandardsUL
Conductor gauge12 gauge
Field-cut methodFlush-cut with a fine-toothed hacksaw; file rough edges or flash and remove filings
Field-cutting methodFlush-cut with a fine-toothed hacksaw; file rough edges and brush out filings
Outdoor-use restrictionNot for outdoor use
Maximum track load2400 W
Maximum power rating2400 W
Polarity featureVisual polarity groove
Polarity indicatorVisual polarity groove

Material & Finish

MaterialAluminum
ColorWhite
Body fabricationExtruded

Dimensions & Weight

Overall Width/Diameter (mm)34.925
Overall Width/Diameter (Inch)1.375
Height (in.)0.625
Width (in.)1.375
Length (in.)96
Bus-wire trim after field cuttingTrim 1/4 off the bus-wire end after a flush cut in.
Minimum additional-hole setback from track ends6 in
Additional mounting-hole size5/32 in
Additional mounting-hole guidance5/32-in. holes through the track centerline, at least 6 in. from track ends
Bus-wire trim after field cut1/4 in
Toggle-wing mounting-hole size1/2 in.
Maximum support-point spacingNot more than 4 ft

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.