Skip to content
Elite Lighting

Elite Lighting Single-Circuit Track L Connector with Power Entry, Black

0 Reviews
SKU
ET108-ABK

Elite Lighting ET108-ABK is a black, single-circuit track L connector with a power-entry feed for a right-angle track junction. It measures 3.6 Ă— 3.6 in; listed specifications show 120 V input, 20 A current, 1800 W maximum wattage, and UL in the standards field.

  • Right-Angle L Connector
  • Power-Entry Feed
  • Single-Circuit Design
  • 120 V, 20 A, 1800 W
  • 3.6 Ă— 3.6 in Dimensions
  • UL Standard

Product Overview

Elite Lighting ET108-ABK is a black, single-circuit track L connector with a power-entry feed for a right-angle track junction. It measures 3.6 Ă— 3.6 in; listed specifications show 120 V input, 20 A current, 1800 W maximum wattage, and UL in the standards field.

Technical Specifications

Product information and specifications for the selected item.

SKU: ET108-ABK

Product Information

BrandElite Lighting
MPNET108-ABK
SKUET108-ABK
UPC / GTIN848070046371
CategoryFixture Mounting & Accessories

Accessory & Fit

Track attachmentInsert connector ends into track ends; tighten the tip lock screws until snug and do not overtighten, as this may distort the track.
Polarity OrientationGround contact must be on the same side as the track polarity groove; if misaligned, the connector can be adjusted 180°.
Polarity alignmentKeep the ground contact on the same side as the track polarity groove.
Polarity adjustmentIf the ground contact and polarity groove do not line up, remove the cover and rotate the connector 180°.

Features & Standards

StandardsUL
Cover installation timingFor power-feed wiring, leave the cover off until wire connections are made.
Maximum Wattage1800 W
Terminal WiringLine connects to brass screw P; neutral to nickel-plated screw N; ground to green screw when required.
Current20 A
Power-feed wire entryRemove the plastic plug button from the back plate and route supply wires through the center.
Input Voltage120 V
Power-feed terminal connectionsLine connects to the brass terminal marked P; neutral to the nickel-plated terminal marked N; ground to the green screw when required.
Circuit Count1 circuit

Material & Finish

ColorBlack

Dimensions & Weight

Overall Width/Diameter (Inch)3.6
Width (in.)3.6
Length (in.)3.6

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.