Skip to content
First Alert

First Alert SM2-W10-T Hardwired Photoelectric Smoke Alarm

0 Reviews
SKU
SM2-W10-T

The white First Alert SM2-W10-T is a hardwired photoelectric smoke alarm with a sealed, non-replaceable 10-year lithium-ion battery backup and an included quick-connect plug. It is UL certified, supports interconnection, and measures 5.2 in. wide Ă— 5.2 in. long Ă— 1.76 in. high.

  • Photoelectric Smoke Detection
  • 120 VAC Hardwired Supply
  • Sealed 10-Year Battery Backup
  • Interconnection Capacity
  • Quick-Connect Plug Included
  • UL Certified

The white First Alert SM2-W10-T is a hardwired photoelectric smoke alarm with a sealed, non-replaceable 10-year lithium-ion battery backup and an included quick-connect plug. It is UL certified, supports interconnection, and measures 5.2 in. wide Ă— 5.2 in. long Ă— 1.76 in. high.

Product Overview

The white First Alert SM2-W10-T is a hardwired photoelectric smoke alarm with a sealed, non-replaceable 10-year lithium-ion battery backup and an included quick-connect plug. It is UL certified, supports interconnection, and measures 5.2 in. wide Ă— 5.2 in. long Ă— 1.76 in. high.

  • Photoelectric Smoke Detection
  • 120 VAC Hardwired Supply
  • Sealed 10-Year Battery Backup
  • Interconnection Capacity
  • Quick-Connect Plug Included
  • UL Certified

Technical Specifications

Product information and specifications for the selected item.

SKU: SM2-W10-T

Product Information

BrandFirst Alert
MPNSM2-W10-T
SKUSM2-W10-T
UPC / GTIN194160017296
CategorySafety Supplies

Key Specs

Certifications and ListingsUL Certified
Bundle/SingleSingle Product

Safety & Compliance

Certifications and ListingsUL Certified
Compatible smart alarmSC5 Smart Smoke & CO Alarm
Installer requirementWiring and installation must be performed by a licensed electrician
Smoke alarm signal pattern3-pulse temporal pattern
Operating temperature range40–100 °F (4.4–38 °C)
Interconnect circuit requirementAll interconnected units must share the same fuse or circuit breaker
Operating humidity range20–95% RH, non-condensing (93% maximum for agency compliance)
Audible alarm level85 dB minimum at 10 feet (3 meters)
Interconnect wiring requirementsAll interconnected units must share a fuse or circuit breaker; total interconnect wire length under 1,000 ft (300 m)
Required power circuit24-hour 120 VAC, 60 Hz pure sine wave circuit; must not be switched, dimmed, or GFCI-controlled
Maximum interconnect wire lengthLess than 1,000 ft (300 m)
Intended environmentOrdinary indoor residential areas
Storage temperature range14–158 °F (-10–70 °C)
Battery replaceableNo
Mounting compatibilityStandard wiring junction box up to 4 in. (10 cm); ceiling or wall mounting where local codes allow
Backup battery chemistryLithium-ion, non-replaceable
Ceiling fan and register clearanceDo not install within 36 inches of ceiling fans or supply registers
Alarm replacement intervalReplace the alarm every 10 years
Maximum interconnected units18 total; maximum 12 smoke alarms
Maximum interconnect capacityMaximum 18 compatible units total, including a maximum of 12 smoke alarms
Mounting instructionMount flush to the electrical box to prevent air leaks between the ceiling and bracket
AC power rating120 VAC @ 60 Hz, 0.7 A
Smoke sensitivity2.4%/ft obscuration ±25%
Compatible interconnection devicesCompatible with First Alert and BRK smoke and heat alarms, and Smart Interconnect CO alarms
Battery typeLithium

Package & Appearance

Bundle/SingleSingle Product
Hardware Color FamilyWhite

Dimensions & Weight

Height (in.)1.76
Width (in.)5.2
Length (in.)5.2
Weight (lb.)0.48

Product Documents

  • SC2/SM2 Series 120V Smoke & Combination Carbon Monoxide Alarms — Getting Started Guide Manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.