Skip to content
nVent GARDNER BENDER

GARDNER BENDER HST-1300 Underground UF Splice Kit, 14–8 AWG

0 Reviews
SKU
HST-1300

The nVent GARDNER BENDER HST-1300 is a direct-burial UF splice kit for copper cable from 14 AWG through 8 AWG. It includes four set-screw connectors and an 8-inch heavy-wall polyolefin heat-shrink tube with a watertight adhesive liner, and is specified for up to 600 V.

  • 14–8 AWG Copper UF Cable
  • Four Brass Set-Screw Connectors
  • 8-Inch Adhesive-Lined Tubing
  • 600 V Maximum
  • Direct-Burial, Damp/Wet Use
  • 3:1 Shrink Ratio

Product Overview

The nVent GARDNER BENDER HST-1300 is a direct-burial UF splice kit for copper cable from 14 AWG through 8 AWG. It includes four set-screw connectors and an 8-inch heavy-wall polyolefin heat-shrink tube with a watertight adhesive liner, and is specified for up to 600 V.

Technical Specifications

Product information and specifications for the selected item.

SKU: HST-1300

Product Information

BrandnVent GARDNER BENDER
MPNHST-1300
SKUHST-1300
UPC / GTIN032076569013
CategoryTerminals, Splices & Connectors

Key Specs

Wire Connector TypeSplicer
Minimum Wire Gauge14
Color FamilyBlack
Length (in.)1.5

Connector & Wire

Wire Connector TypeSplicer
Minimum Wire Gauge14
Maximum conductor configuration8-3 with ground wire
Location suitabilityDamp or wet locations
Maximum voltage600 V
Cable preparation strip lengthsJacket strip: 2; conductor insulation strip: 5/8 in.
Shrink ratio3:1
Connector materialBrass
CSA standardC22.2 No 198.2-05
Flame classVW-1
Cable typeUF (Underground Feeder)
Heat application methodHeat gun or torch
Heat-shrink tubing constructionHeavy-wall polyolefin heat-shrink tubing with watertight adhesive liner
Operating temperature range-5 to 105 °C
Proper-installation indicatorTubing is smooth and conforms to the cable; sealant/adhesive is visible at both ends
Suitable locationsDamp or wet locations
Tubing material and constructionHeavy-wall polyolefin
Tubing linerWatertight adhesive liner
Recommended heat application temperature200 °C
Conductor material compatibilityCopper wiring only
Screw tightening torque8 inch-pounds
Installation suitabilityDirect burial
UF cable jacket strip length2 in
Maximum conductor size8-3 with ground wire
UL standardUL468D
SealingWaterproof seal

Color & Finish

Color FamilyBlack

Dimensions & Weight

Height (in.)8
Width (in.)1.5
Length (in.)1.5
Weight (lb.)0.16

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.