Skip to content
nVent GARDNER BENDER

GARDNER BENDER LTG-400 Green Liquid Electrical Tape, 4 oz, Brush-On

0 Reviews
SKU
LTG-400

nVent GARDNER BENDER LTG-400 is a green, 4 oz brush-on liquid electrical tape with an air-dry synthetic rubber coating. It is specified for indoor and outdoor use and has a waterproof, UV-resistant dielectric seal, with a temperature use range of -30°F to 200°F.

  • 4 oz Brush-On Format
  • 1,400 V/mil Dielectric Strength
  • Indoor/Outdoor Waterproof Seal
  • -30°F to 200°F Temperature Range
  • Air-Dry Synthetic Rubber Coating
  • Green Color

nVent GARDNER BENDER LTG-400 is a green, 4 oz brush-on liquid electrical tape with an air-dry synthetic rubber coating. It is specified for indoor and outdoor use and has a waterproof, UV-resistant dielectric seal, with a temperature use range of -30°F to 200°F.

Product Overview

nVent GARDNER BENDER LTG-400 is a green, 4 oz brush-on liquid electrical tape with an air-dry synthetic rubber coating. It is specified for indoor and outdoor use and has a waterproof, UV-resistant dielectric seal, with a temperature use range of -30°F to 200°F.

  • 4 oz Brush-On Format
  • 1,400 V/mil Dielectric Strength
  • Indoor/Outdoor Waterproof Seal
  • -30°F to 200°F Temperature Range
  • Air-Dry Synthetic Rubber Coating
  • Green Color

Technical Specifications

Product information and specifications for the selected item.

SKU: LTG-400

Product Information

BrandnVent GARDNER BENDER
MPNLTG-400
SKULTG-400
UPC / GTIN032076065270
CategoryTape, Sealants & Consumables

Key Specs

Color FamilyGreen
Length (in.)2
Width (in.)2

Tape & Appearance

Color FamilyGreen
Viscosity range90–110 K.U. at 77°F (+/- 2°F)
Mixing before useGently stir with brush applicator cap before each use to avoid bubbles
Weatherability3–5 (ASTM G-53) years
Application methodEasily brushed on
Stone abrasion resistanceExcellent (ASTM D-3170)
Dry time before additional coats10–20 minutes to touch dry
Flexibility and durabilityWill not crack, peel, or harden; remains flexible even under extreme conditions
Coat applicationApply wet, overlapping coats
Shelf life1 year at 77ËšF
Surface preparationClean and dry; free of oils, grease, wax, and loose rust
Temperature use range-30 to 200 °F
Cut resistanceVery good (ASTM D-1044)
Durometer hardness70 (ASTM D-2240) Shore A
Coating materialAir dry synthetic rubber coating
Chemical resistanceExcellent for acids, alkalines, and pollutants; limited for petroleum
Full cure time24 hours
Moisture resistanceExcellent
Dielectric strength1,400 V/mil
Tensile430 (ASTM D-638) %
Salt spray resistancePassed 1,000 (ASTM B-117) hours
Dry time before use4 hours per coat
Permeability.03 (ASTM E-96) grains/sq. ft./hr.
Solids content24 % by weight

Dimensions & Weight

Height (in.)3.5
Width (in.)2
Length (in.)2
Weight (lb.)0.331
Coat count and dielectric thickness2–3 coats recommended; minimum 2 coats (5+ mils) for good dielectric protection

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.