Skip to content

Generac 200A 120/208V 3-Phase Service-Entrance Automatic Transfer Switch, NEMA 3R

0 Reviews
SKU
RTSW200G3

The Generac RTSW200G3 is an automatic 200 A transfer switch for 120/208 V three-phase optional standby systems. It is service-entrance rated, uses open-transition transfer, and has a NEMA 3R outdoor aluminum enclosure with an integrated deadfront. Generator compatibility is specified for three-phase units using Evolution™ or Nexus™ controllers.

  • 200 A Maximum Rating
  • 120/208 V Three-Phase
  • Service-Entrance Rated
  • Open-Transition Switching
  • NEMA 3R Aluminum Enclosure
  • Evolution™ and Nexus™ Compatibility

Product Overview

The Generac RTSW200G3 is an automatic 200 A transfer switch for 120/208 V three-phase optional standby systems. It is service-entrance rated, uses open-transition transfer, and has a NEMA 3R outdoor aluminum enclosure with an integrated deadfront. Generator compatibility is specified for three-phase units using Evolution™ or Nexus™ controllers.

Technical Specifications

Product information and specifications for the selected item.

SKU: RTSW200G3

Product Information

BrandGenerac
MPNRTSW200G3
SKURTSW200G3
UPC / GTIN696471620467
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)200
Automatic/ManualAutomatic

Electrical Ratings

Maximum Amperage (A)200
Utility voltage pickup threshold>90 %
Utility voltage dropout threshold<60 %
Transfer switch lug range#4 AWG–400 MCM
Tungsten load limit30 % of switch rating
Terminal lug tightening torque275 (31.1) in-lb (Nm)
Breaker lug range#6 AWG–300 MCM
Available fault-current rating18,000 RMS symmetrical at 480 VAC maximum
Short-circuit withstand rating18 kA

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, Water Resistant
Engine cooldown timer60 seconds (5 minutes on turbo configuration)
Generator compatibilityFor three-phase generators using Evolution™ or Nexus™ controllers
Enclosure materialAluminum
Re-transfer time delay15 seconds
Load transition typeOpen transition
Supported load typesMotors, electric discharge lamps, tungsten-filament loads, and electric-heating equipment
Exerciser scheduleNexus™: 12 weekly; Evolution™: adjustable 5–12, weekly/bi-weekly/monthly minutes
Permitted mounting locationsIndoor or outdoor
Timer to generator start5 factory-set; adjustable from 2 to 1,500 by a qualified dealer with Evolution™ controls seconds
Control functionsGenerator controller handles timing, sensing, exercising, and transfer commands
Mounting orientationVertical, on a rigid supporting structure
Enclosure finishElectrostatically applied powder coating
Conduit entry requirementUse wet-location-listed fittings for conduit entries above uninsulated live parts
Engine warmup delay5 factory-set; adjustable from 2 to 1,500 by a qualified dealer with Evolution™ controls seconds
Neutral switchingThree-phase neutral connects to a neutral lug and is not switched
Intended applicationFor optional standby systems only (NEC Article 702)

Dimensions & Weight

Height (in.)48
Width (in.)21.8
Length (in.)10.1
Weight (lb.)55

Product Documents

  • Catalog Page — Service Rated Automatic Transfer Switch, 200 A, 120/208Y V AC, 3-Phase Other Open / download file
  • Generac Power Systems Two-Year Limited Warranty for Stationary Emergency Transfer Switch Systems (0K3102 Rev. C) Warranty Open / download file
  • Owner’s Manual for Automatic Transfer Switch, 100–200 Amp, Three Phase, Service Entrance (0L1517 Rev. B) Manual Open / download file
  • 3-Phase Sensing Wire Upgrade PZ410 Kit Installation Instructions (A0003140507) Installation manual Open / download file
  • Service Rated Automatic Transfer Switches, 100–200 Amps, Three Phase (Bulletin 10000003427-A, 2016 edition) Spec sheet Open / download file
  • Service Rated Automatic Transfer Switches, 100–200 Amps, Three Phase (10000003427 Rev. C) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.