Skip to content

Generac Guardian 26kW Air-Cooled Home Standby Generator, Aluminum Enclosure

0 Reviews
SKU
7290

Generac's Guardian 7290 is an air-cooled residential standby generator with an aluminum enclosure, rated for 26 kW on LP or 22.5 kW on natural gas. It supplies 120/240 V single-phase power, uses a 999 cc Generac G-Force 1000 Series engine, and has Wi-Fi/Mobile Link remote-monitoring capability. A transfer switch is not included.

  • 26 kW LP / 22.5 kW Natural Gas Output
  • 120/240 V, Single-Phase Output
  • Transfer Switch Not Included
  • 110 A Main-Line Breaker
  • Aluminum Enclosure
  • Wi-Fi/Mobile Link Remote Monitoring

Product Overview

Generac's Guardian 7290 is an air-cooled residential standby generator with an aluminum enclosure, rated for 26 kW on LP or 22.5 kW on natural gas. It supplies 120/240 V single-phase power, uses a 999 cc Generac G-Force 1000 Series engine, and has Wi-Fi/Mobile Link remote-monitoring capability. A transfer switch is not included.

Technical Specifications

Product information and specifications for the selected item.

SKU: 7290

Product Information

BrandGenerac
MPN7290
SKU7290
UPC / GTIN696471087307
CategoryResidential Standby Generators

Key Specs

Running Wattage26000 W
Popular Running Wattage26000 W
Power/Fuel TypeNatural Gas, Propane
Operational VolumeStandard (Above 60 dB)

Generator Output

Running Wattage26000 W
Popular Running Wattage26000 W
Power/Fuel TypeNatural Gas, Propane
Natural gas consumption1/2 load: 188 ftÂł/hr (5.32 mÂł/hr); full load: 333 ftÂł/hr (9.43 mÂł/hr) ftÂł/hr; mÂł/hr
Power derating with altitude and temperatureApproximately 3.5% per 1,000 ft (304.8 m) above sea level and 1% per 10 °F (6 °C) above 60 °F (16 °C)
Rated maximum continuous load currentLP: 108.3; NG: 93.8 A
Rated voltage240 V
Power factor1.0
Phase and rated AC frequency1 phase; 60 Hz
Liquid propane consumption1/2 load: 75 ftÂł/hr (2.06 gal/hr; 7.78 L/hr); full load: 132 ftÂł/hr (3.63 gal/hr; 13.73 L/hr) ftÂł/hr; gal/hr; L/hr

Transfer & Application

ApplicationEmergency Use, Home Standby
Required fuel inlet pressureNG: 3.5–7 in water column (0.87–1.74 kPa); LP: 10–12 in water column (2.49–2.99 kPa) in. water column; kPa
Minimum recommended fuel BTU contentNatural gas: at least 1,000 BTU/ftÂł (37.26 MJ/mÂł); LP: at least 2,500 BTU/ftÂł (93.15 MJ/mÂł) BTU/ftÂł; MJ/mÂł
Fuel connection and sediment trap14 in (35.6 cm) flexible connector listed ANSI Z21.75/CSA 6.27; integral sediment trap meets IFGC and NFPA 54 in; cm
Generator main line circuit breaker (disconnect)110 A

Features & Operation

FeaturesAutomatic Voltage Regulation, Built-in Remote Monitoring, Electric Start, Hour Meter, LCD Display, Low Oil Shutdown, Muffler, Overload Protection
Operational VolumeStandard (Above 60 dB)
Number of cylinders2 cylinders
Oil capacityApprox. 1.9 qt / 1.8 L, including filter qt; L
Ignition systemSolid-state with magneto
Engine displacement999 cc
Enclosure finish and wind resistanceBisque finish; weather-protective enclosure withstands winds up to 150 mph (241 km/h) mph; km/h
Engine typeGenerac G-Force 1000 Series
Battery requirement12 V; Group 26R, 540 CCA minimum or Group 35 AGM, 650 CCA minimum (battery not included) V; CCA
Valve arrangementOverhead valve
Normal operating temperature range-20 °F (-29 °C) to 122 °F (50 °C) °F; °C
Operating speed3,600 rpm
Rating standards and emissions certificationRatings in accordance with BS5514, ISO3046, UL2200, and DIN6271; U.S. EPA certified for non-emergency applications
Cylinder block constructionAluminum with cast iron sleeve

Dimensions & Weight

Height (in.)28.6
Width (in.)25.5
Length (in.)48.5
Weight (lb.)518
Installation clearancesFront and ends: minimum 3 ft (0.91 m); rear: minimum 18 in (457 mm); overhead: at least 5 ft (1.52 m) ft; in; m; mm

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.