Skip to content

Generac HTS 800A Single-Phase Automatic Transfer Switch, 120/240V

0 Reviews
SKU
HTSN800A3

The Generac HTSN800A3 is an 800 A automatic transfer switch for 120/240 V single-phase systems, with open-transition operation. It is specified for Generac commercial-series generators rated 70–150 kW with the H-100 controller.

  • 800 A maximum rating
  • 120/240 V, single-phase
  • Automatic transfer operation
  • Open-transition switching
  • Generac H-100 compatibility
  • UL Listed

The Generac HTSN800A3 is an 800 A automatic transfer switch for 120/240 V single-phase systems, with open-transition operation. It is specified for Generac commercial-series generators rated 70–150 kW with the H-100 controller.

Product Overview

The Generac HTSN800A3 is an 800 A automatic transfer switch for 120/240 V single-phase systems, with open-transition operation. It is specified for Generac commercial-series generators rated 70–150 kW with the H-100 controller.

  • 800 A maximum rating
  • 120/240 V, single-phase
  • Automatic transfer operation
  • Open-transition switching
  • Generac H-100 compatibility
  • UL Listed

Technical Specifications

Product information and specifications for the selected item.

SKU: HTSN800A3

Product Information

BrandGenerac
MPNHTSN800A3
SKUHTSN800A3
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)800
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)800
Power conductor size500MCM-1/0
Power terminal lug typeSolderless, screw-type
Live-part electrical clearanceAt least 1 in
Ungrounded conductor wire range4 × 4/0–500 MCM
Ground terminal wire range3x(1) #4-600MCM OR (6) 1/0-250MCM
TVSS surge capacity88 kA per mode
Neutral supply conductor wire range12 × 1/0–750 MCM
Terminal lug torque375 in-lb
Power terminal lug constructionSolderless, screw-type

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, On Indicator Light
Communication protocolModbus RTU
Mounting arrangementTypically floor-standing and mounted to the wall
Generator/controller compatibilityGenerac commercial-series generators (70–150 kW) with the H-100 controller
Installation environmentIndoor use only
Controller interface2-wire communications link; permits remote mounting from the generator
Load transition typeOpen transition
Compatible Power Manager controller familiesGxxx and Hxxx
Communications-loss timeout20 s
Main contact mechanismElectrically operated; mechanically latched
Communication settings4800 baud; no parity; 2 stop bits
Generator control during communications lossGenerator must be started and stopped manually if communications are lost
Enclosure use and protectionIndoor use; protection against contact and a degree of protection against dust, falling dirt, and dripping non-corrosive liquids
Lost-message timeout threshold20 s
Protocol and network roleModbus RTU slave

Certifications

Certifications and ListingsUL Listed

Dimensions & Weight

Height (in.)60
Width (in.)36
Length (in.)20
Weight (lb.)700

Product Documents

  • Owner’s Manual — HTS “Wn” Type Automatic Transfer Switch, 600 through 2600 Amp, 600 Volts Manual Open / download file
  • Generac Transfer Switches and Accessories — Product Specifications Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.