Skip to content

Generac Next Generation 100A Service-Entrance-Rated Automatic Transfer Switch, No SPD

0 Reviews
SKU
9934

Generac model 9934 is a 100 A automatic open-transition transfer switch for 120/240 V single-phase systems, with a NEMA Type 3R enclosure and a Type BQ, two-pole utility-service circuit breaker. This service-entrance-rated, no-SPD model is specified for single-phase generators using Evolution™, Power Zone™ 200, or Power Zone™ 410 controllers.

  • 100 A maximum rating
  • 120/240 V single-phase
  • Automatic open-transition operation
  • Service-entrance Type BQ breaker
  • NEMA Type 3R enclosure
  • No SPD included

Generac model 9934 is a 100 A automatic open-transition transfer switch for 120/240 V single-phase systems, with a NEMA Type 3R enclosure and a Type BQ, two-pole utility-service circuit breaker. This service-entrance-rated, no-SPD model is specified for single-phase generators using Evolution™, Power Zone™ 200, or Power Zone™ 410 controllers.

Product Overview

Generac model 9934 is a 100 A automatic open-transition transfer switch for 120/240 V single-phase systems, with a NEMA Type 3R enclosure and a Type BQ, two-pole utility-service circuit breaker. This service-entrance-rated, no-SPD model is specified for single-phase generators using Evolution™, Power Zone™ 200, or Power Zone™ 410 controllers.

  • 100 A maximum rating
  • 120/240 V single-phase
  • Automatic open-transition operation
  • Service-entrance Type BQ breaker
  • NEMA Type 3R enclosure
  • No SPD included

Technical Specifications

Product information and specifications for the selected item.

SKU: 9934

Product Information

BrandGenerac
MPN9934
SKU9934
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)100
FusedFused
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)100
FusedFused
Neutral switchingSingle-phase neutral connects to a neutral lug and is not switched
Utility service breaker type and polesType BQ, 2-pole
Control terminal screw torque3.5 (0.4) in-lb (Nm)
Utility service breaker conductor torque50 (5.6) in-lb (Nm)
Generator control wiring classificationClass 1 signaling circuit
Neutral-ground bonding jumperA jumper bonds neutral and ground; remove it if the switch is not used as service equipment
Load compatibilitySuitable for motors, electric-discharge lamps, tungsten-filament and electric-heating loads; tungsten load must not exceed 30% of switch rating
Withstand rating10,000 A
System voltage and phase120/240, single-phase V
Recommended control wire gauge and runMinimum No. 18 AWG; up to 500 ft (152.4 m)
Utility service breaker conductor range#1 to #8 (Cu/Al) AWG

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, Water Resistant
Engine cooldown timer60 seconds
Mounting orientationMount upright on a vertical rigid supporting structure to maintain the Type 3R rating
Re-transfer time delay15 seconds
Utility voltage dropout settingPower Zone 200/410: adjustable 75–80%; Evolution: dealer-adjustable 58–71%
Enclosure materialAluminum
Utility voltage pickup settingPower Zone 200/410: adjustable 84–89%; Evolution: dealer-adjustable 79–90%
Generator/controller compatibilityFor single-phase generators using Evolution™, Power Zone™ 200, or Power Zone™ 410 controllers
Timer to generator start10 factory-set; adjustable 2–1,500 by a qualified dealer seconds
Engine warmup delay5 seconds
Enclosure finishElectrostatically applied and baked powder paint
Timing and sensing controlTiming and sensing functions originate in the generator controller
Transition typeOpen transition

Certifications

Certifications and ListingsUL Listed
Enclosure typeNEMA Type 3R

Dimensions & Weight

Height (in.)30
Width (in.)13.5
Length (in.)6.6
Weight (lb.)27

Product Documents

  • Installation Drawing—100A/150A/200A Service Entrance Transfer Switch (A0006058193) Drawing photometric Open / download file
  • Generac Transfer Switch 5-Year Limited Warranty Statement (0K9470) Warranty Open / download file
  • Automatic Transfer Switch Owner’s Manual, 100–200 Amp (A0009313194) Manual Open / download file
  • Service Rated Automatic Transfer Switches — Specification Sheet (A0006813756) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.