Skip to content

Generac Protector Series 48kW Scratch-and-Dent Liquid-Cooled Standby Generator, LP/NG, 120/240VAC, 3-Phase

0 Reviews
SKU
RG04845JNAXSD

The Generac Protector Series RG04845JNAXSD is a scratch-and-dent, 48 kW liquid-cooled standby generator with 120/240 VAC three-phase output and a listed current of 144 A. It runs on LP or natural gas and uses a 4.5 L naturally aspirated inline-four engine. It is approved for commercial use and intended exclusively for outdoor installation.

  • 48 kW Running Output
  • 120/240 VAC, Three-Phase Output
  • LP/NG Fuel Options
  • 144 A Output Current
  • Liquid-Cooled 4.5 L Engine
  • Approved for Commercial Use

Product Overview

The Generac Protector Series RG04845JNAXSD is a scratch-and-dent, 48 kW liquid-cooled standby generator with 120/240 VAC three-phase output and a listed current of 144 A. It runs on LP or natural gas and uses a 4.5 L naturally aspirated inline-four engine. It is approved for commercial use and intended exclusively for outdoor installation.

Technical Specifications

Product information and specifications for the selected item.

SKU: RG04845JNAXSD

Product Information

BrandGenerac
MPNRG04845JNAXSD
SKURG04845JNAXSD
CategoryCommercial Standby Generators

Key Specs

Running Wattage48000 W
Amperage (A)144
Output Voltage120/240 VAC
Electrical Phases3
Fuel TypeDual-Fuel (LP/NG)
LP Power Capacity48

Generator Output

Running Wattage48000 W
Amperage (A)144
Output Voltage120/240 VAC
Electrical Phases3
Temperature derate1.7% per 10°F above 77°F (1.5% per 5°C above 25°C)
Maximum 24-hour average output70 % of ESP rating
Altitude derate3% per 1,000 ft above 600 ft (1% per 100 m above 183 m)

Fuel Capacity

Fuel TypeDual-Fuel (LP/NG)
LP Power Capacity48
NG Power Capacity48
NG consumption at exercise and full loadExercise: 101 (2.9); 100% load: 607 (17.2) cfh (mÂł/h)
Fuel supply pressure rangesLP vapor: 7–14 (1.74–3.48); NG: 3.5–14 (0.87–3.48) in H₂O (kPa)
LP consumption at exercise and full loadExercise: 0.7 (2.6); 100% load: 6.6 (25.0) US gph (L/h)

Engine & Cooling

Engine BrandGenerac
Cooling TypeLiquid Cooled
RPM1800 rpm
Exhaust flow at rated output104 (2.9) cfm (mÂł/min)
Engine displacement4.43 L
Crankcase capacity12 qt
Coolant mixture and system capacity50/50 coolant (50% ethylene glycol); capacity 2.9 US gal (11 L)
Oil filter typeFull flow spin-on cartridge
Engine configuration4.5 L inline 4-cylinder, naturally aspirated
Maximum ambient air temperature122 (50) °F (°C)
Exhaust temperature at rated output945 (507) °F (°C)

Features & Connections

Generator FeaturesAutomatic Voltage Regulation, Hour Meter, Low Oil Alert/Shutdown
FeaturesApproved for Commercial Use, EPA Compliant
Approved for Commercial UseYes
Installation code requirementsInstall in accordance with NFPA 37 and NFPA 70, plus applicable federal, state, and local codes
Installation environmentAll-weather enclosure; intended exclusively for outdoor installation
Power-use limitationNot intended for prime power; intended as an intermediate power supply during temporary outages only
Listing and emissions statusUL 2200 listed; EPA emissions certified
Wind speed rating115 (185); requires a correctly prepared concrete pad and anchoring system mph (km/h)
Fuel line connection1-1/4 in. NPT female tee through baseframe opening
Sound level at exercise speed68 dB(A) at 23 ft (7 m)
Enclosure material and finishCorrosion-resistant aluminum; bisque finish

Dimensions & Weight

Height (in.)46
Width (in.)35
Length (in.)83.4
Weight (lb.)1781
Concrete pad and mounting requirementsRecommended pad: 47 in wide Ă— 95.4 in long (1193.8 Ă— 2423.2 mm), with a 6-in offset; recommended mounting bolts or studs: 1/2 in diameter
SwRI-listed structure clearanceAs close as 18 in (457 mm) from a structure, subject to placement away from doors, windows, and fresh-air intakes and local codes in (mm)

Product Documents

  • SwRI Document of Compliance for Stationary Engine Generator Assemblies (Document No. 13204-01-01) Certification compliance Open / download file
  • Prop 65 Warning Label Safety sheet Open / download file
  • Generac Power Systems 5 Year (5M) Limited Warranty for Residential and Commercial Standby Generators Warranty Open / download file
  • Owner's Manual — Spark-Ignited Stationary Generators, Residential and Commercial, 48 kW/60 kW/80 kW, 4.5 L Manual Open / download file
  • Installation Guidelines — Spark-Ignited Stationary Generators, Protector Series 48 kW/60 kW/80 kW (A0000253470 Rev. D) Installation manual Open / download file
  • RG Protector Series Standby Generators, Liquid-Cooled Gaseous Engine — Specification Sheet Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.