Skip to content

Generac Smart Service-Rated Automatic Transfer Switch, 150A, 120/240V, 1-Phase, NEMA 3R

0 Reviews
SKU
RXSW150A3

The Generac RXSW150A3 is a UL Listed, 150 A service-rated automatic transfer switch for 120/240 V, single-phase generator systems. It uses open-transition transfer, is non-fused, and has a NEMA 3R enclosure. It is compatible with single-phase generators using Evolution or Nexus controllers.

  • 150 A Maximum Rating
  • 120/240 V, Single-Phase
  • Service-Rated Configuration
  • Evolution/Nexus Compatibility
  • NEMA 3R Enclosure
  • Automatic Open-Transition Transfer

Product Overview

The Generac RXSW150A3 is a UL Listed, 150 A service-rated automatic transfer switch for 120/240 V, single-phase generator systems. It uses open-transition transfer, is non-fused, and has a NEMA 3R enclosure. It is compatible with single-phase generators using Evolution or Nexus controllers.

Technical Specifications

Product information and specifications for the selected item.

SKU: RXSW150A3

Product Information

BrandGenerac
MPNRXSW150A3
SKURXSW150A3
UPC / GTIN00696471069624
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)150
FusedNon-Fused
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)150
FusedNon-Fused
Service breaker line-terminal tightening torque375 in-lb
Maximum tungsten load share30 % of switch rating
Service breaker load-terminal tightening torque275 in-lb
Service circuit-breaker frequency50/60 Hz
Power terminal conductor range#6–250 MCM (Cu/Al)
Auxiliary-contact rating10 A at 125 or 250 VAC; 0.6 A at 125 VDC
Service breaker pole/frame marking2-pole, 225AF
Short-circuit withstand rating22,000 A
Transfer-mechanism conductor range#6-250 MCM (Cu/Al)
Transfer-mechanism terminal tightening torque275 in-lb
Service breaker load-terminal conductor range250 MCM - 6 STR (Cu/Al)
Generator control-terminal screw torque3.5 in-lb
Service-breaker A/C rating22,000 A/C
Ground/neutral connection torqueGround: 50; neutral: 275 in-lb
Service breaker line-terminal conductor range300 MCM - 6 STR (Cu/Al)
Smart A/C control-contact rating24 VAC, 1.0 A max

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, On Indicator Light, Overload Protection, Water Resistant
Enclosure materialAluminum
Recommended generator control-wire sizes and lengthsNo. 18 AWG: 1–115 ft; No. 16 AWG: 116–185 ft; No. 14 AWG: 186–295 ft; No. 12 AWG: 296–460 ft
Neutral-ground bonding jumperNeutral-ground jumper; remove if not used as service equipment
Load-shed frequency thresholdsLoads shed below 58 Hz for 3 seconds or below 50 Hz for ½ second (60 Hz systems)
Generator control-wiring classificationClass 1 signaling circuit
Load transition typeOpen transition
Neutral switchingNeutral connects to a neutral lug and is not switched
Generator controller compatibilitySingle-phase generators using an Evolution™ or Nexus™ controller

Certifications

Certifications and ListingsUL Listed

Dimensions & Weight

Height (in.)30
Width (in.)13.5
Length (in.)6.3

Product Documents

  • Schematic and Wiring Diagram — SE Transfer Switch 100–200A (Drawing No. 10000006038) Drawing photometric Open / download file
  • General Assembly Drawing — Assembly 150A Service Entrance General CB Drawing photometric Open / download file
  • Owner’s Manual — Automatic Transfer Switch, 100–200 Amp, Service Entrance and Non-Service Entrance (Rev. F) Manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.