Skip to content
Greenlee

Greenlee 1-1/8" Quick-Change Carbide-Tipped Hole Cutter

0 Reviews
SKU
645-1-1/8

The Greenlee 645-1-1/8 is a 1-1/8-in quick-change carbide-tipped hole cutter for 3/4-in conduit holes. It cuts stainless steel, mild steel, aluminum, copper, brass, fiberglass, and plastics; the compatible 645-011 arbor is sold separately.

  • 1-1/8-Inch Cutting Diameter
  • Cuts Metals, Fiberglass, and Plastics
  • 8-Gauge Maximum Material Thickness
  • 645-011 Arbor Compatibility
  • Push-and-Turn Quick Change
  • Tungsten-Carbide Teeth

Product Overview

The Greenlee 645-1-1/8 is a 1-1/8-in quick-change carbide-tipped hole cutter for 3/4-in conduit holes. It cuts stainless steel, mild steel, aluminum, copper, brass, fiberglass, and plastics; the compatible 645-011 arbor is sold separately.

Technical Specifications

Product information and specifications for the selected item.

SKU: 645-1-1/8

Product Information

BrandGreenlee
MPN645-1-1/8
SKU645-1-1/8
UPC / GTIN0783310056973
CategoryTools

Key Specs

Bundle/SingleSingle Product
Color FamilyGray
Width (in.)1.45

Package & Appearance

Bundle/SingleSingle Product
Color FamilyGray
Slug ejectionEjector spring on sizes above 3/4 in; eases slug removal
Cutting oil requirementNo oil required for stainless-steel cutting
Cutting edge materialTungsten carbide teeth
Post-cut cleanupRemove chips or slugs from the cutter after each hole
Suitable workpiece materialsStainless steel, copper, aluminum, and steel
Impact-drill modeRotary operation only when used with an impact drill
Cutter-tip materialTungsten carbide
Recommended cutting speedStainless steel: 370; mild steel: 535 RPM
Feed pressure by materialLight feed for thin, soft materials; moderate feed for hard, thick materials
Applicable materialsStainless steel, mild steel, aluminum, copper, brass, fiberglass, and plastics
Tooth handlingCarbide teeth are brittle; handle carefully to prevent chipping or breakage
Drill pathDrill straight in and out; avoid side-to-side wobble
Pilot drillReplaceable cobalt-steel pilot drill with split-point tip; resists walking
Cutting orientationKeep perpendicular to the work; cut flat surfaces only, not curved material
Cutter change mechanismPush-and-turn connection; switch sizes without re-chucking
Pilot breakthrough techniqueReduce pilot-bit pressure before breakthrough; use slight-to-moderate pressure after cutter contact
Over-drill stopFlange stop prevents over-drilling
Quick-change interfacePush-and-turn cutter-head change; same arbor serves different head sizes

Dimensions & Weight

Width (in.)1.45
Length (in.)3.9
Weight (lb.)0.16
Minimum chuck size3/8 in (9.5 mm)
Compatible arbor645-011 quick-change arbor with 3/8-in shank
Maximum cutting depth8 ga. (4 mm)
Conduit / PG fit3/4 in conduit; PG 21
Maximum material thickness8 ga
Conduit hole compatibility1-1/8-in (28.6-mm) hole for 3/4-in conduit

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.