Skip to content
Greenlee

Greenlee RXM Quick-Adjust Reel Stand Set of 2

0 Reviews
SKU
RXM - SET OF 2

The Greenlee RXM set contains two steel quick-adjust reel stands for dispensing cable from reels. The stands accommodate 23–72 in. spool diameters and support a maximum spool weight of 6,000 lb per pair. A Greenlee reel stand spindle is required for a complete setup.

  • Set of Two Stands
  • 23–72 in. Spool Range
  • 6,000 lb Pair Capacity
  • Pivot-and-Slide Head Adjustment
  • Open-Head Top Loading
  • Snap-Button Fold-Down

Product Overview

The Greenlee RXM set contains two steel quick-adjust reel stands for dispensing cable from reels. The stands accommodate 23–72 in. spool diameters and support a maximum spool weight of 6,000 lb per pair. A Greenlee reel stand spindle is required for a complete setup.

Technical Specifications

Product information and specifications for the selected item.

SKU: RXM - SET OF 2

Product Information

BrandGreenlee
MPNRXM - SET OF 2
SKURXM - SET OF 2
CategoryTools

Key Specs

Bundle/SingleBundle
Color FamilyGreen

Package & Appearance

Bundle/SingleBundle
Color FamilyGreen
Fold-down mechanismSnap button folds stand down for storage or transport
Complete setup requirementTwo RXM reel stands and one Greenlee reel stand spindle are required for a complete setup
Spindle loading designOpen head allows quick top-loading of spindle
Head and jack adjustmentHead assembly pivots and slides up or down to position rollers under the spindle; the crank can raise the jack for very large reels
Jack lubricationKeep jack internal gearing and bushings lubricated; apply automotive grease to the internal gearing at the lubrication point near the crank
Spindle retentionForward extensions secure the spindle during the pull
Intended useDispensing cable from cable reels
Reel stabilizationChock cable reels at all ground contact points to prevent movement during setup
Surface requirementUse only on a hard, flat, level surface
Handle lubricationApply lightweight oil to both sides of the handle tube
Loading and unloading clearanceKeep hands and feet clear when loading and unloading cable reels
Spindle alignmentAlign head assembly rollers with the groove at the end of the spindle
Head assembly adjustment cautionSecurely hold the head assembly during adjustment; it can drop quickly if not held
Spindle levelingAdjust the other stand's crank until the spindle is level and the reel rotates freely
Caster and wheel restrictionDo not attach casters or wheels to the stand
Maintenance frequencyAt least annually
Head adjustment mechanismPivot-and-slide quick adjustment for different spool diameters
MaterialSteel
Reel conditionDo not use with damaged reels; they may not roll freely and may be pulled off the reel roller
Crank configurationSidewind crank located at the top of the jack
Lifting configurationRemove the pin, pivot the jack upward, then insert the pin through the upper sockets

Dimensions & Weight

Capacity per unit3000 lb
Spool diameter capacity23–72 in
Maximum spool weight capacity6,000 lb per pair

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.