Greenlee SPEED PUNCH® Long Draw Stud, 3/4" Dia × 5.64"L
0 Reviews
SKU
7212SP12
Greenlee 7212SP12 is a SPEED PUNCH® long draw stud made of carbon steel with a black oxide finish, listed at 3/4 in. diameter and 5.64 in. long. It is specified for use with the Greenlee 746 hydraulic ram and other SPEED PUNCH® system components for conduit-sized hole punching in mild steel, aluminum, fiberglass, or plastic.
Listed Equipment Compatibility
SPEED PUNCH System Required
Mild Steel Through 10 Gauge
3/4-Inch Diameter, 5.64-Inch Length
Carbon Steel Construction
Black Oxide Finish
Greenlee 7212SP12 is a SPEED PUNCH® long draw stud made of carbon steel with a black oxide finish, listed at 3/4 in. diameter and 5.64 in. long. It is specified for use with the Greenlee 746 hydraulic ram and other SPEED PUNCH® system components for conduit-sized hole punching in mild steel, aluminum, fiberglass, or plastic.
Greenlee 7212SP12 is a SPEED PUNCH® long draw stud made of carbon steel with a black oxide finish, listed at 3/4 in. diameter and 5.64 in. long. It is specified for use with the Greenlee 746 hydraulic ram and other SPEED PUNCH® system components for conduit-sized hole punching in mild steel, aluminum, fiberglass, or plastic.
Listed Equipment Compatibility
SPEED PUNCH System Required
Mild Steel Through 10 Gauge
3/4-Inch Diameter, 5.64-Inch Length
Carbon Steel Construction
Black Oxide Finish
Technical Specifications
Product information and specifications for the selected item.
SKU: 7212SP12
Product Information
Brand
Greenlee
MPN
7212SP12
SKU
7212SP12
UPC / GTIN
783310009795
Category
Fasteners & Hardware
Key Specs
Fastener Type
Specialty Fastener
Fastener Material
Steel
Fastener Plating
Black Oxide
Capacity & Fastener
Fastener Type
Specialty Fastener
Fastener Material
Steel
Maximum mild-steel thickness
Up through 10 gauge (3.5 mm)
Lock engagement
Clip the lock onto the draw stud and seat it fully in all grooves
Finish & Use
Fastener Plating
Black Oxide
Measurement System
Inches
System component requirement
Must be used with other SPEED PUNCH® System components
Compatible equipment
LS100X, LS50L2, 746A Ram
Compatible workpiece materials
For punching conduit-sized holes in mild steel, aluminum, fiberglass, and plastic
Hydraulic assembly sequence
Thread the stud into the driver and fit the die; insert the stud through the pilot hole and fit the punch