Skip to content
nVent CADDY

Hammer-On Flange Clip, Side Mount, 5/16"–1/2" Flange

0 Reviews
SKU
4H58

The nVent CADDY 4H58 is a spring-steel, side-mount hammer-on flange clip that provides an attachment for wire, S-hooks, chain, nVent CADDY Speed Link, or other assemblies on flanges and profiles. It accommodates 5/16–1/2-inch flange thicknesses and has a 1/4-inch hole.

  • 5/16–1/2-Inch Flange Range
  • Wire, S-Hook, Chain & Speed Link Attachment
  • 200 lb Static Load
  • 1/4-Inch Hole
  • Spring Steel Construction
  • Side-Mount Hammer-On Design

The nVent CADDY 4H58 is a spring-steel, side-mount hammer-on flange clip that provides an attachment for wire, S-hooks, chain, nVent CADDY Speed Link, or other assemblies on flanges and profiles. It accommodates 5/16–1/2-inch flange thicknesses and has a 1/4-inch hole.

Product Overview

The nVent CADDY 4H58 is a spring-steel, side-mount hammer-on flange clip that provides an attachment for wire, S-hooks, chain, nVent CADDY Speed Link, or other assemblies on flanges and profiles. It accommodates 5/16–1/2-inch flange thicknesses and has a 1/4-inch hole.

  • 5/16–1/2-Inch Flange Range
  • Wire, S-Hook, Chain & Speed Link Attachment
  • 200 lb Static Load
  • 1/4-Inch Hole
  • Spring Steel Construction
  • Side-Mount Hammer-On Design

Technical Specifications

Product information and specifications for the selected item.

SKU: 4H58

Product Information

BrandnVent CADDY
MPN4H58
SKU4H58
UPC / GTIN782856121008
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Beam Clamps
Length (in.)1.4567
Width (in.)1.2598

Support & Fit

Pipe Hangers & Supports TypePipe Beam Clamps
Load qualificationConfirmed for both tension load and tensile pulsating load per figure G.3 of EN 13964
Corrosion protectionISO 12944-6; category C4; high durability
Resistance to fixingPass
Static load200 lb
CertificationsCE; cULus
Load limitationLoad ratings are for static conditions and do not account for dynamic wind, water or seismic loads unless otherwise noted
Installation methodInstalls with just a hammer
Performance standardEN 13964:2014
Admissible load under EN 139641000 N
Environment limitationSpring-steel products shall be used only in a non-corrosive indoor environment
Flange thickness range5/16–1/2 in.
Attachment compatibilityProvides an attachment for wire, S-hooks, chain, nVent CADDY Speed Link or other assemblies to flanges and profiles
FinishnVent CADDY Armour
Supported attachments and mounting surfacesProvides an attachment for wire, S-hooks, chain, nVent CADDY Speed Link or other assemblies to flanges and profiles
Reaction to fireNot applicable for small kit component (I4.2)
MaterialSpring Steel
Intended useFor internal use in buildings only

Dimensions & Weight

Height (in.)0.8661
Width (in.)1.2598
Length (in.)1.4567
Weight (lb.)0.0309
Hole size1/4 in.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.