Skip to content
MEAN WELL

HLG-240H LED Driver

0 Reviews
SKU
HLG-240H-C2100A (FOR PK 240W LITE

The MEAN WELL HLG-240H-C2100A is a constant-current LED driver with a 2.1 A rated output adjustable from 1.05 to 2.10 A via its built-in A-type potentiometer, plus fanless free-air convection cooling. Verify the exact electrical and enclosure ratings against the unit because the supplied records contain conflicting configuration details.

  • 1.05–2.10 A adjustable output
  • 249.9 W listed wattage
  • 47–63 Hz input frequency
  • Body dimensions 9.614 × 2.677 × 1.528 in
  • Fanless free-air cooling
  • Short-circuit current limiting

The MEAN WELL HLG-240H-C2100A is a constant-current LED driver with a 2.1 A rated output adjustable from 1.05 to 2.10 A via its built-in A-type potentiometer, plus fanless free-air convection cooling. Verify the exact electrical and enclosure ratings against the unit because the supplied records contain conflicting configuration details.

Product Overview

The MEAN WELL HLG-240H-C2100A is a constant-current LED driver with a 2.1 A rated output adjustable from 1.05 to 2.10 A via its built-in A-type potentiometer, plus fanless free-air convection cooling. Verify the exact electrical and enclosure ratings against the unit because the supplied records contain conflicting configuration details.

  • 1.05–2.10 A adjustable output
  • 249.9 W listed wattage
  • 47–63 Hz input frequency
  • Body dimensions 9.614 × 2.677 × 1.528 in
  • Fanless free-air cooling
  • Short-circuit current limiting

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-240H-C2100A (FOR PK 240W LITE

Product Information

BrandMEAN WELL
MPNHLG-240H-C2100A (FOR PK 240W LITE
SKUHLG-240H-C2100A (FOR PK 240W LITE
CategoryLED Drivers & Ballasts

Key Specs

Wattage Range249.9 W
Voltage120V-277V

Electrical

Wattage Range249.9 W
Voltage120V-277V
Overvoltage protection responseShuts down and latches off the output; repower to recover.
Output-current adjustment range1050–2100 mA
Output current tolerance±5 %
Output current and adjustmentRated 2.1 A; adjustable from 1.05 to 2.10 A via the built-in potentiometer (A type).
Input frequency range47–63 Hz
Output current ripple5.0 maximum at rated current %
Typical power factor≥0.98 at 115 VAC; ≥0.95 at 230 VAC; ≥0.92 at 277 VAC, at full load
Temperature coefficient±0.03 over 0–50 %/°C
Total harmonic distortion<20% at load ≥50% for 115/230 VAC, and load ≥75% for 277 VAC
Lead color codingFG green/yellow; AC/L brown; AC/N blue; −V blue; +V brown.
Typical efficiency93.5 typical %
Short-circuit protectionConstant-current limiting; recovers automatically after the fault is removed.
Overtemperature protection responseShuts down the output and recovers automatically when temperature falls.
Lead wiringA-type input cable: 3C, 17 AWG, SJOW & H05RN-F, 1.0 mm²; output cable for models other than C700: 2C, same cable specification.

Compatibility & Operation

Product typeLED Drivers
Altitude deratingFor fanless models, ambient-temperature derating is 3.5°C per 1,000 m above 2,000 m altitude. °C/1000 m
CoolingFanless design; free-air convection.
Mains installation requirementFor ErP lighting-fixture requirements, use behind a switch; do not leave permanently connected to the mains.
Operating case temperature-40 to +90 °C
Storage temperature and humidity-40 to +80; 10–95 °C; % RH
Operating humidity20–95, non-condensing % RH
Vibration10–500 Hz, 5G, 12 min./cycle; 72 min. along each of the X, Y, and Z axes.

Certifications & Warranty

Ratings & CertificatesCULUS
Typical life expectancyMore than 62,000 hours when the case tc point is about 75°C or less.
MTBF2513.7K h minimum (Telcordia SR-332); 228.5K h minimum (MIL-HDBK-217F at 25°C).

Dimensions & Weight

Height (in.)1.528
Width (in.)2.677
Length (in.)9.614
Weight (lb.)2.866
Mounting holesFour Ø4.2 mm mounting holes.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.