Skip to content
MEAN WELL

HLG-60H-24B 60W 24V Dimmable LED Driver

0 Reviews
SKU
HLG-60H-24B

The MEAN WELL HLG-60H-24B is a 60 W, 24 V LED driver rated at 2.5 A, with constant-voltage/constant-current output and B-type 3-in-1 dimming. Its dimming inputs are 1–10 VDC, 10 V PWM, or resistance; the approved product description lists an IP67 rating and damp-location classification.

  • 60 W, 24 V, 2.5 A output
  • Three B-type dimming methods
  • AC/DC input range
  • IP67 ingress rating
  • Metal Class I housing
  • 6.732 × 2.421 × 1.449 in dimensions

Product Overview

The MEAN WELL HLG-60H-24B is a 60 W, 24 V LED driver rated at 2.5 A, with constant-voltage/constant-current output and B-type 3-in-1 dimming. Its dimming inputs are 1–10 VDC, 10 V PWM, or resistance; the approved product description lists an IP67 rating and damp-location classification.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-60H-24B

Product Information

BrandMEAN WELL
MPNHLG-60H-24B
SKUHLG-60H-24B
CategoryLED Drivers & Ballasts

Electrical

Wattage Range60 W
Input operating range90–305 VAC AC input; 127–431 VDC DC input
Input frequency range47–63 Hz
Maximum units per 16 A circuit breakerAt 230 VAC: up to 9 units on a 16 A type B breaker or 16 units on a 16 A type C breaker
Overtemperature responseShuts down output; re-power on to recover
Maximum output ripple and noise150 mVp-p
Rated output current2.5 A
Inrush current55 (typical cold-start at 230 VAC; pulse width 265 μs measured at 50% Ipeak)
Overvoltage protection28–35 V threshold for the HLG-60H-24 output model; shuts down output and requires re-powering to recover
Short-circuit responseHiccup mode; automatically recovers after the fault condition is removed
Overcurrent response95–108% threshold; constant-current limiting; automatically recovers after the fault condition is removed
Dimming circuit isolationNot isolated from the secondary output.
Power factor correctionBuilt-in active PFC
Typical efficiency89.5 for the HLG-60H-24 output model (typical) %
Typical power factor≥0.98 at 115 VAC; ≥0.95 at 230 VAC; ≥0.92 at 277 VAC, at full load

Compatibility & Operation

Product typeLED Drivers
Operating case temperature−40 to +80 °C
Working humidity20–95, non-condensing % RH
Cooling designFanless; operates under free-air convection
LED load compatibilityDirect connection to LEDs is recommended; not suitable with additional drivers.
Dimming wiring cautionDo not connect DIM− to −V.
PWM dimming frequency100–3,000 Hz
Dimming input methodsB-type accepts 1–10 VDC, 10 V PWM, or resistance applied between DIM+ and DIM−.
Dimming source current100 (typical) μA

Certifications & Warranty

Ratings & CertificatesDamp Location
Typical life expectancy>62,000 hours when Tcase at the tc point is about 70°C or less

Dimensions & Weight

Height (in.)1.449
Width (in.)2.421
Length (in.)6.732
Weight (lb.)1.576
Housing materialMetal

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.