Skip to content

Hubbell RF400 Round PVC Floor Box, 1-Gang, Gray, 6" Deep

0 Reviews
SKU
RF400

The Hubbell Wiring Device-Kellems RF400 is a round, gray, nonmetallic PVC, single-gang floor box for concrete floors. It accepts 3/4-in. and 1-in. Schedule 40 or Schedule 80 PVC conduit, includes four reducers and closure plugs, and has a temporary concrete cover with locator flag. The box can be cut to height after the pour.

  • Concrete-Floor Application
  • Single-Gang Round Box
  • 3/4- and 1-Inch PVC Conduit
  • Gray Nonmetallic PVC
  • Reducers, Plugs, and Cover Included
  • Cut-to-Height After Pour

Product Overview

The Hubbell Wiring Device-Kellems RF400 is a round, gray, nonmetallic PVC, single-gang floor box for concrete floors. It accepts 3/4-in. and 1-in. Schedule 40 or Schedule 80 PVC conduit, includes four reducers and closure plugs, and has a temporary concrete cover with locator flag. The box can be cut to height after the pour.

Technical Specifications

Product information and specifications for the selected item.

SKU: RF400

Product Information

BrandHubbell Wiring Device-Kellems
MPNRF400
SKURF400
UPC / GTIN883778112898
CategoryElectrical Boxes

Key Specs

Capacity (cu. in.)98
Box TypeOutlet
Number of Gangs1
Number of Knockouts/Holes2
Knockout/Hole Size (in.)1, 3/4
Metallic/Non-MetallicNon-Metallic

Capacity & Configuration

Capacity (cu. in.)98
Box TypeOutlet
Number of Gangs1
Number of Knockouts/Holes2
Knockout/Hole Size (in.)1, 3/4
ShapeRound
Conduit compatibilityAccepts Schedule 40 and Schedule 80 PVC conduit.
Multi-service wiring requirementA low-voltage divider is required for multi-service power/telephone-data use.
JLOAD divider compatibilityUse the RF408 low-voltage divider with RF400 when installing a JLOAD Multimedia Outlet.
Receptacle positionThe receptacle is recessed to minimize plug protrusion.

Construction & Application

Metallic/Non-MetallicNon-Metallic
ApplicationFloor
MaterialPVC
Color FamilyGray
Included componentsFour reducers, closure plugs, and a concrete cover with locator flag are included.
Scrub-water sealingUse only clear silicone-type RTV sealant for scrub-water tightness.
EU RoHS indicatorYes
Flange/cover use limitationThe flange/cover is not intended for high-traffic installations or to support furniture.
Upper-floor fire-rating conditionProvide adequate concrete thickness beneath the box to preserve the floor fire rating per applicable codes.
On-grade anchoringSet the box level and fasten it to tie-down stakes; stakes are not supplied.
Pre-pour mountingOn-grade: set level and fasten to tie-down stakes (not provided); above-grade: fasten to the concrete form.
Pre-assembled componentsFlange, cover, and leveling ring are pre-assembled.
Temporary cover load limitationThe temporary concrete cover is not load-bearing; replace it with a permanent flange/cover immediately after the concrete hardens.

Dimensions & Weight

Height (in.)6.5
Width (in.)5.5
Length (in.)7.3
Weight (lb.)1.603
Minimum concrete pour depth4 in
Post-pour height adjustmentBox can be cut after the pour to adjust its height.
Floor-finish opening clearanceFor carpet/tile, make the opening 1/8 in. larger than the floor box.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.